I set up my bluetooth keyboard on my openmoko phone using the 'new' (In other words, not hidd, but still dbus) input interface, and it only works like 10% of the time. That means when I turn it on it should connect and start working. Unfortunately, it only works about 25% of the time, and I have to switch it off and on frequenly in order to get it to finally connect. I get this output from hcidump -V when it doesn't work:
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:0A:DF:00:24:59 class 0x002540 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:0A:DF:00:24:59 role 0x00
Role: Master
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x22 handle 42 bdaddr 00:0A:DF:00:24:59 type ACL encrypt 0x00
Error: LMP Response Timeout
The difference in time between 'Accept Connection Request' and 'LMP Response Timeout' is about 3 seconds. I was under the impression that LMP negociation was supposed to time out after 30 seconds?
Is there something I'm doing wrong? Am I not interprating this correctly?
If it does work I get something like this:
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:0A:DF:00:24:59 class 0x002540 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:0A:DF:00:24:59 role 0x00
Role: Master
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Link Key Request (0x17) plen 6
bdaddr 00:0A:DF:00:24:59
.
.
.
(And then link key request reply and so on it does its negociation and there you have it)
--
Daniel Benoy
http://daniel.benoy.name
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
