Re: blkdiscard BLKDISCARD ioctl failed: Remote I/O error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 21, 2022 at 02:09:12PM +0100, Lukas Czerner wrote:
> Hi,
> 
> the problem is definitelly not in util-linux. In kernel there are checks
> in place that would prevent proceeding with out of range BLKDISCARD ioctl,
> but that's not what we hit here.
> 
> In the logs below you can see that the actual discard request failed,
> but it appears to be well within the device range. I don't know what is
> going on, maybe someone in the linux-block have a clue (adding to cc).
> 
> Meanwhile please let us know what kernel version do you have and provide
> a blkparse output of the blkdiscard run. You can do this for example
> 
> blktrace -a discard -d /dev/sdb -o - | \
> blkparse -o output -f "%D %2c %8s %5T.%9t %6p %2a %3d %10S + %10U (%4e) [%C]\n" -i -
> 
> then run the blkdiscard and see the content of output file.
> 
> Thanks!
> -Lukas
> 
> 
> 
> On Mon, Feb 21, 2022 at 01:34:57PM +0100, Olaf Fraczyk wrote:
> > Hello,
> > 
> > I had to put the disk in use, and I needed it in MBR format, so I can't
> > create GPT now.
> > 
> > Anyway, the reported size seems to be OK.
> > 
> > I have created 3rd partition to go till the end of the disk, as below:
> > 
> > Device     Boot      Start        End    Sectors   Size Id Type
> > /dev/sdb1             2048    4196351    4194304     2G fd Linux raid
> > autodetect
> > /dev/sdb2          4196352 1874855935 1870659584   892G fd Linux raid
> > autodetect
> > /dev/sdb3       1874855936 1875385007     529072 258.3M 83 Linux
> > 
> > I can fill it to the last sector using dd without problems:
> > 
> > [root@vh3 ~]# dd if=/dev/zero of=/dev/sdb3 bs=1024 count=264536
> > 264536+0 records in
> > 264536+0 records out
> > 270884864 bytes (271 MB, 258 MiB) copied, 4.81622 s, 56.2 MB/s
> > 
> > When I do blkdiscard:
> > 
> > root@vh3 ~]# blkdiscard -l 264536K /dev/sdb3
> > blkdiscard: /dev/sdb3: BLKDISCARD ioctl failed: Remote I/O error
> > [root@vh3 ~]# blkdiscard -l 264535K /dev/sdb3
> > [root@vh3 ~]#
> > 
> > In the /var/log/messages for the failed discard I get:
> > Feb 21 13:19:52 vh3 kernel: sd 1:0:1:0: [sdb] tag#2227 FAILED Result:
> > hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
> > Feb 21 13:19:52 vh3 kernel: sd 1:0:1:0: [sdb] tag#2227 Sense Key : Illegal
> > Request [current]
> > Feb 21 13:19:52 vh3 kernel: sd 1:0:1:0: [sdb] tag#2227 Add. Sense: Logical
> > block address out of range
> > Feb 21 13:19:52 vh3 kernel: sd 1:0:1:0: [sdb] tag#2227 CDB: Unmap/Read
> > sub-channel 42 00 00 00 00 00 00 00 18 00
> > Feb 21 13:19:52 vh3 kernel: blk_update_request: critical target error, dev
> > sdb, sector 1874855936 op 0x3:(DISCARD) flags 0x800 phys_seg 1 prio class 0
> > 
> > I have the drive on a SAS controller - mpt3sas driver, LSI SAS2008

Looks one target issue, CC linux-scsi and mpt3sas guys.

> > > >
> > > > I tried to trim entire drive but I get the following error:
> > > > [root@vh3 util-linux-2.38-rc1]# ./blkdiscard /dev/sdb
> > > > lt-blkdiscard: /dev/sdb: BLKDISCARD ioctl failed: Remote I/O error
> > > >
> > > > I have done strace and I see:
> > > > ioctl(3, BLKGETSIZE64, [960197124096])  = 0
> > > > ioctl(3, BLKSSZGET, [512])              = 0
> > > > ioctl(3, BLKDISCARD, [0, 960197124096]) = -1 EREMOTEIO (Remote I/O error)
> > > >
> > > > When I do the same giving length explicitly I get the same error.
> > > >
> > > > However when I specify the length 512 bytes smaller, it works without a
> > > > problem:
> > > >
> > > > ioctl(3, BLKGETSIZE64, [960197124096])  = 0
> > > > ioctl(3, BLKSSZGET, [512])              = 0
> > > > ioctl(3, BLKDISCARD, [0, 960197123584]) = 0


Thanks,
Ming




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux