On Mon, Feb 21, 2022 at 02:38:02PM +0100, Olaf Fraczyk wrote: > Kernel: > Linux version 4.18.0-348.12.2.el8_5.x86_64 ( > mockbuild@xxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 8.5.0 20210514 (Red Hat > 8.5.0-4) (GCC)) #1 SMP Wed Jan 19 14:35:04 EST 2022 Ah, I didn't know this is RHEL. You should contact you support representative who can walk you through creating an issue tracker for this problem so that we can help you resolve this. Or if you don't have one at least create a RH bugzilla for this. Thanks! -Lukas > > Here is what I got: > [root@vh3 blk]# cat output > 8,16 1 1 0.000000000 416746 A DS 1874855936 + 8388624 ( > 0) [blkdiscard] > 8,16 1 2 0.000005308 416746 Q DS 1874855936 + 1701733231 ( > 0) [blkdiscard] > 8,16 1 3 0.000013479 416746 G DS 1874855936 + 1952807028 ( > 0) [blkdiscard] > 8,16 1 4 0.000015854 416746 I DS 1874855936 + 875639306 ( > 0) [blkdiscard] > 8,16 1 5 0.000029054 312 D DS 1874855936 + 943207737 ( > 0) [kworker/1:1H] > 8,16 1 6 0.000100222 0 C DS 1874855936 + 1397697848 ( > 0) [swapper/1] > 8,16 1 7 0.000109791 0 C DS 1874855936 + 157966687 > (65415) [swapper/1] > CPU1 (8,16): > Reads Queued: 0, 0KiB Writes Queued: 1, > 264,536KiB > Read Dispatches: 0, 0KiB Write Dispatches: 1, > 264,536KiB > Reads Requeued: 0 Writes Requeued: 0 > Reads Completed: 0, 0KiB Writes Completed: 2, > 264,536KiB > Read Merges: 0, 0KiB Write Merges: 0, > 0KiB > Read depth: 0 Write depth: 1 > IO unplugs: 0 Timer unplugs: 0 > > Throughput (R/W): 0KiB/s / 0KiB/s > Events (8,16): 7 entries > Skips: 0 forward (0 - 0.0%) > > Olaf > > pon., 21 lut 2022 o 14:09 Lukas Czerner <lczerner@xxxxxxxxxx> napisał(a): > > > Hi, > > > > the problem is definitelly not in util-linux. In kernel there are checks > > in place that would prevent proceeding with out of range BLKDISCARD ioctl, > > but that's not what we hit here. > > > > In the logs below you can see that the actual discard request failed, > > but it appears to be well within the device range. I don't know what is > > going on, maybe someone in the linux-block have a clue (adding to cc). > > > > Meanwhile please let us know what kernel version do you have and provide > > a blkparse output of the blkdiscard run. You can do this for example > > > > blktrace -a discard -d /dev/sdb -o - | \ > > blkparse -o output -f "%D %2c %8s %5T.%9t %6p %2a %3d %10S + %10U (%4e) > > [%C]\n" -i - > > > > then run the blkdiscard and see the content of output file. > > > > Thanks! > > -Lukas > > > > > > > > On Mon, Feb 21, 2022 at 01:34:57PM +0100, Olaf Fraczyk wrote: > > > Hello, > > > > > > I had to put the disk in use, and I needed it in MBR format, so I can't > > > create GPT now. > > > > > > Anyway, the reported size seems to be OK. > > > > > > I have created 3rd partition to go till the end of the disk, as below: > > > > > > Device Boot Start End Sectors Size Id Type > > > /dev/sdb1 2048 4196351 4194304 2G fd Linux raid > > > autodetect > > > /dev/sdb2 4196352 1874855935 1870659584 892G fd Linux raid > > > autodetect > > > /dev/sdb3 1874855936 1875385007 529072 258.3M 83 Linux > > > > > > I can fill it to the last sector using dd without problems: > > > > > > [root@vh3 ~]# dd if=/dev/zero of=/dev/sdb3 bs=1024 count=264536 > > > 264536+0 records in > > > 264536+0 records out > > > 270884864 bytes (271 MB, 258 MiB) copied, 4.81622 s, 56.2 MB/s > > > > > > When I do blkdiscard: > > > > > > root@vh3 ~]# blkdiscard -l 264536K /dev/sdb3 > > > blkdiscard: /dev/sdb3: BLKDISCARD ioctl failed: Remote I/O error > > > [root@vh3 ~]# blkdiscard -l 264535K /dev/sdb3 > > > [root@vh3 ~]# > > > > > > In the /var/log/messages for the failed discard I get: > > > Feb 21 13:19:52 vh3 kernel: sd 1:0:1:0: [sdb] tag#2227 FAILED Result: > > > hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s > > > Feb 21 13:19:52 vh3 kernel: sd 1:0:1:0: [sdb] tag#2227 Sense Key : > > Illegal > > > Request [current] > > > Feb 21 13:19:52 vh3 kernel: sd 1:0:1:0: [sdb] tag#2227 Add. Sense: > > Logical > > > block address out of range > > > Feb 21 13:19:52 vh3 kernel: sd 1:0:1:0: [sdb] tag#2227 CDB: Unmap/Read > > > sub-channel 42 00 00 00 00 00 00 00 18 00 > > > Feb 21 13:19:52 vh3 kernel: blk_update_request: critical target error, > > dev > > > sdb, sector 1874855936 op 0x3:(DISCARD) flags 0x800 phys_seg 1 prio > > class 0 > > > > > > I have the drive on a SAS controller - mpt3sas driver, LSI SAS2008 > > > > > > Best regards, > > > > > > Olaf > > > > > > > > > > > > > > > > > > pon., 21 lut 2022 o 10:06 Karel Zak <kzak@xxxxxxxxxx> napisał(a): > > > > > > > > > > > Hi Olaf, > > > > > > > > from my point of view it seems like kernel (SSD driver) issue. The > > > > ioctl needs to accept range from 0 to device size. The another > > > > possibility is that the device itself reports incorrect size. Do you > > > > see another issue, for example when you try to create GPT partition > > > > table on the device, or so? Do you see anything in dmesg output? > > > > > > > > CC: Lukas Czerner who understands kernel part :-) > > > > > > > > Karel > > > > > > > > > > > > On Thu, Feb 17, 2022 at 10:32:06PM +0100, Olaf Fraczyk wrote: > > > > > Hello, > > > > > > > > > > Tried: > > > > > util-linux-2.32.1-28.el8.x86_64 (Almalinux 8) > > > > > util-linux-2.38-rc1 (compiled from sources) > > > > > > > > > > I have a problem with blkdiscard and Samsung PM893 SSD 960GB drive. > > > > > > > > > > I tried to trim entire drive but I get the following error: > > > > > [root@vh3 util-linux-2.38-rc1]# ./blkdiscard /dev/sdb > > > > > lt-blkdiscard: /dev/sdb: BLKDISCARD ioctl failed: Remote I/O error > > > > > > > > > > I have done strace and I see: > > > > > ioctl(3, BLKGETSIZE64, [960197124096]) = 0 > > > > > ioctl(3, BLKSSZGET, [512]) = 0 > > > > > ioctl(3, BLKDISCARD, [0, 960197124096]) = -1 EREMOTEIO (Remote I/O > > error) > > > > > > > > > > When I do the same giving length explicitly I get the same error. > > > > > > > > > > However when I specify the length 512 bytes smaller, it works > > without a > > > > > problem: > > > > > > > > > > ioctl(3, BLKGETSIZE64, [960197124096]) = 0 > > > > > ioctl(3, BLKSSZGET, [512]) = 0 > > > > > ioctl(3, BLKDISCARD, [0, 960197123584]) = 0 > > > > > > > > > > Disk size from fdisk: > > > > > [root@vh3 util-linux-2.38-rc1]# fdisk -l /dev/sdb > > > > > Disk /dev/sdb: 894.3 GiB, 960197124096 bytes, 1875385008 sectors > > > > > Units: sectors of 1 * 512 = 512 bytes > > > > > Sector size (logical/physical): 512 bytes / 4096 bytes > > > > > I/O size (minimum/optimal): 4096 bytes / 4096 bytes > > > > > > > > > > > > > > > Is this a problem with the SSD drive or with the blkdiscard command / > > > > ioctl? > > > > > Could you please help me solve this issue? > > > > > > > > > > Best regards, > > > > > > > > > > Olaf Frączyk > > > > > > > > -- > > > > Karel Zak <kzak@xxxxxxxxxx> > > > > http://karelzak.blogspot.com > > > > > > > > > > > >
