Re: LKFT: arm x15: mmc1: cache flush error -110

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/21/20 1:48 AM, Ulf Hansson wrote:
External email: Use caution opening links or attachments


On Thu, 20 Feb 2020 at 18:54, Naresh Kamboju <naresh.kamboju@xxxxxxxxxx> wrote:

On Wed, 19 Feb 2020 at 21:54, Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote:

On Thu, 13 Feb 2020 at 16:43, Naresh Kamboju <naresh.kamboju@xxxxxxxxxx> wrote:


Try to restore the value for the cache flush timeout, by updating the
define MMC_CACHE_FLUSH_TIMEOUT_MS to 10 * 60 * 1000".

I have increased the timeout to 10 minutes but it did not help.
Same error found.
[  608.679353] mmc1: Card stuck being busy! mmc_poll_for_busy
[  608.684964] mmc1: cache flush error -110
[  608.689005] blk_update_request: I/O error, dev mmcblk1, sector
4302400 op 0x1:(WRITE) flags 0x20800 phys_seg 1 prio class 0

OTOH, What best i could do for my own experiment to revert all three patches and
now the reported error gone and device mount successfully [1].

List of patches reverted,
   mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC
   mmc: block: Use generic_cmd6_time when modifying
     INAND_CMD38_ARG_EXT_CSD
   mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()

[1] https://lkft.validation.linaro.org/scheduler/job/1238275#L4346

- Naresh

Thanks for testing!

This sounds a bit weird, I must say. Also, while looking into the
logs, it seems like you are comparing a v5.5 kernel with v5.6-rc2, but
maybe I didn't read the logs carefully enough.

  In any case, I am looking into creating a debug patch so we can
narrow down the problem a bit further.

Kind regards
Uffe


Hi Ulf,

I see that Jetson-TX2 / Jetson-Xavier suspend test is aborted and below error is seen due to the commit 24ed3bd01d6a844fd5e8a75f48d0a3d10ed71bf9 ("mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC"):

##
[ 268.976197] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  268.984414] OOM killer disabled.
[ 268.987635] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[  269.217471] PM: dpm_run_callback(): mmc_bus_suspend+0x0/0x58 returns -110
[  269.224255] PM: Device mmc1:0001 failed to suspend: error -110
[ 269.230080] PM: Some devices failed to suspend, or early wake event detected
##

I find that from the commit the changes in mmc_flush_cache below is the cause.

##
@@ -961,7 +963,8 @@ int mmc_flush_cache(struct mmc_card *card)
                        (card->ext_csd.cache_size > 0) &&
                        (card->ext_csd.cache_ctrl & 1)) {
                err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-                               EXT_CSD_FLUSH_CACHE, 1, 0);
+                                EXT_CSD_FLUSH_CACHE, 1,
+                                MMC_CACHE_FLUSH_TIMEOUT_MS);

##

 Do you have suggestion to try for the suspend errors ?

-regards,
 Bitan




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux