Re: [PATCH v3 2/2] mdadm: Introduce new array state 'broken' for raid0/linear

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22/08/2019 13:13, Guilherme G. Piccoli wrote:
> Currently if a md raid0/linear array gets one or more members removed while
> being mounted, kernel keeps showing state 'clean' in the 'array_state'
> sysfs attribute. Despite udev signaling the member device is gone, 'mdadm'
> cannot issue the STOP_ARRAY ioctl successfully, given the array is mounted.
> 
> Nothing else hints that something is wrong (except that the removed devices
> don't show properly in the output of mdadm 'detail' command). There is no
> other property to be checked, and if user is not performing reads/writes
> to the array, even kernel log is quiet and doesn't give a clue about the
> missing member.
> 
> This patch is the mdadm counterpart of kernel new array state 'broken'.
> The 'broken' state mimics the state 'clean' in every aspect, being useful
> only to distinguish if an array has some member missing. All necessary
> paths in mdadm were changed to deal with 'broken' state, and in case the
> tool runs in a kernel that is not updated, it'll work normally, i.e., it
> doesn't require the 'broken' state in order to work.
> Also, this patch changes the way the array state is showed in the 'detail'
> command (for raid0/linear only) - now it takes the 'array_state' sysfs
> attribute into account instead of only rely in the MD_SB_CLEAN flag.
> 
> Cc: NeilBrown <neilb@xxxxxxxx>
> Cc: Song Liu <songliubraving@xxxxxx>
> Signed-off-by: Guilherme G. Piccoli <gpiccoli@xxxxxxxxxxxxx>
> ---
> 
> v2 -> v3:
> * Nothing changed.
> 
> v1 -> v2:
> * Added handling for md/linear 'broken' state.
> 
> 
>  Detail.c  | 17 +++++++++++++++--
>  Monitor.c |  9 +++++++--
>  maps.c    |  1 +
>  mdadm.h   |  1 +
>  mdmon.h   |  2 +-
>  monitor.c |  4 ++--
>  6 files changed, 27 insertions(+), 7 deletions(-)
> 
> diff --git a/Detail.c b/Detail.c
> index ad60434..cc7e9f1 100644
> --- a/Detail.c
> +++ b/Detail.c
> @@ -81,6 +81,7 @@ int Detail(char *dev, struct context *c)
>  	int external;
>  	int inactive;
>  	int is_container = 0;
> +	char arrayst[12] = { 0 }; /* no state is >10 chars currently */
>  
>  	if (fd < 0) {
>  		pr_err("cannot open %s: %s\n",
> @@ -485,9 +486,21 @@ int Detail(char *dev, struct context *c)
>  			else
>  				st = ", degraded";
>  
> +			if (array.state & (1 << MD_SB_CLEAN)) {
> +				if ((array.level == 0) ||
> +				    (array.level == LEVEL_LINEAR))
> +					strncpy(arrayst,
> +						map_num(sysfs_array_states,
> +							sra->array_state),
> +						sizeof(arrayst)-1);
> +				else
> +					strncpy(arrayst, "clean",
> +						sizeof(arrayst)-1);
> +			} else
> +				strncpy(arrayst, "active", sizeof(arrayst)-1);
> +
>  			printf("             State : %s%s%s%s%s%s \n",
> -			       (array.state & (1 << MD_SB_CLEAN)) ?
> -			       "clean" : "active", st,
> +			       arrayst, st,
>  			       (!e || (e->percent < 0 &&
>  				       e->percent != RESYNC_PENDING &&
>  				       e->percent != RESYNC_DELAYED)) ?
> diff --git a/Monitor.c b/Monitor.c
> index 036103f..9fd5406 100644
> --- a/Monitor.c
> +++ b/Monitor.c
> @@ -1055,8 +1055,12 @@ int Wait(char *dev)
>  	}
>  }
>  
> +/* The state "broken" is used only for RAID0/LINEAR - it's the same as
> + * "clean", but used in case the array has one or more members missing.
> + */
> +#define CLEAN_STATES_LAST_POS	5
>  static char *clean_states[] = {
> -	"clear", "inactive", "readonly", "read-auto", "clean", NULL };
> +	"clear", "inactive", "readonly", "read-auto", "clean", "broken", NULL };
>  
>  int WaitClean(char *dev, int verbose)
>  {
> @@ -1116,7 +1120,8 @@ int WaitClean(char *dev, int verbose)
>  			rv = read(state_fd, buf, sizeof(buf));
>  			if (rv < 0)
>  				break;
> -			if (sysfs_match_word(buf, clean_states) <= 4)
> +			if (sysfs_match_word(buf, clean_states)
> +			    <= CLEAN_STATES_LAST_POS)
>  				break;
>  			rv = sysfs_wait(state_fd, &delay);
>  			if (rv < 0 && errno != EINTR)
> diff --git a/maps.c b/maps.c
> index 02a0474..49b7f2c 100644
> --- a/maps.c
> +++ b/maps.c
> @@ -150,6 +150,7 @@ mapping_t sysfs_array_states[] = {
>  	{ "read-auto", ARRAY_READ_AUTO },
>  	{ "clean", ARRAY_CLEAN },
>  	{ "write-pending", ARRAY_WRITE_PENDING },
> +	{ "broken", ARRAY_BROKEN },
>  	{ NULL, ARRAY_UNKNOWN_STATE }
>  };
>  
> diff --git a/mdadm.h b/mdadm.h
> index 43b07d5..c88ceab 100644
> --- a/mdadm.h
> +++ b/mdadm.h
> @@ -373,6 +373,7 @@ struct mdinfo {
>  		ARRAY_ACTIVE,
>  		ARRAY_WRITE_PENDING,
>  		ARRAY_ACTIVE_IDLE,
> +		ARRAY_BROKEN,
>  		ARRAY_UNKNOWN_STATE,
>  	} array_state;
>  	struct md_bb bb;
> diff --git a/mdmon.h b/mdmon.h
> index 818367c..b3d72ac 100644
> --- a/mdmon.h
> +++ b/mdmon.h
> @@ -21,7 +21,7 @@
>  extern const char Name[];
>  
>  enum array_state { clear, inactive, suspended, readonly, read_auto,
> -		   clean, active, write_pending, active_idle, bad_word};
> +		   clean, active, write_pending, active_idle, broken, bad_word};
>  
>  enum sync_action { idle, reshape, resync, recover, check, repair, bad_action };
>  
> diff --git a/monitor.c b/monitor.c
> index 81537ed..e0d3be6 100644
> --- a/monitor.c
> +++ b/monitor.c
> @@ -26,7 +26,7 @@
>  
>  static char *array_states[] = {
>  	"clear", "inactive", "suspended", "readonly", "read-auto",
> -	"clean", "active", "write-pending", "active-idle", NULL };
> +	"clean", "active", "write-pending", "active-idle", "broken", NULL };
>  static char *sync_actions[] = {
>  	"idle", "reshape", "resync", "recover", "check", "repair", NULL
>  };
> @@ -476,7 +476,7 @@ static int read_and_act(struct active_array *a, fd_set *fds)
>  		a->next_state = clean;
>  		ret |= ARRAY_DIRTY;
>  	}
> -	if (a->curr_state == clean) {
> +	if ((a->curr_state == clean) || (a->curr_state == broken)) {
>  		a->container->ss->set_array_state(a, 1);
>  	}
>  	if (a->curr_state == active ||
> 

Hi Jes, is there anything to improve in this patch? I'll submit V4 soon
to include some suggestions from Song (in the driver), so if you have
suggestions here I could add them to v4.
Thanks in advance,


Guilherme



[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux