[PATCH AUTOSEL 4.4 21/23] floppy: fix div-by-zero in setup_format_params

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Denis Efremov <efremov@xxxxxxxxx>

[ Upstream commit f3554aeb991214cbfafd17d55e2bfddb50282e32 ]

This fixes a divide by zero error in the setup_format_params function of
the floppy driver.

Two consecutive ioctls can trigger the bug: The first one should set the
drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK
to become zero.  Next, the floppy format operation should be called.

A floppy disk is not required to be inserted.  An unprivileged user
could trigger the bug if the device is accessible.

The patch checks F_SECT_PER_TRACK for a non-zero value in the
set_geometry function.  The proper check should involve a reasonable
upper limit for the .sect and .rate fields, but it could change the
UAPI.

The patch also checks F_SECT_PER_TRACK in the setup_format_params, and
cancels the formatting operation in case of zero.

The bug was found by syzkaller.

Signed-off-by: Denis Efremov <efremov@xxxxxxxxx>
Tested-by: Willy Tarreau <w@xxxxxx>
Signed-off-by: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/block/floppy.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 2daa5b84abbc..42ae1d2d8243 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -2113,6 +2113,9 @@ static void setup_format_params(int track)
 	raw_cmd->kernel_data = floppy_track_buffer;
 	raw_cmd->length = 4 * F_SECT_PER_TRACK;
 
+	if (!F_SECT_PER_TRACK)
+		return;
+
 	/* allow for about 30ms for data transport per track */
 	head_shift = (F_SECT_PER_TRACK + 5) / 6;
 
@@ -3235,6 +3238,8 @@ static int set_geometry(unsigned int cmd, struct floppy_struct *g,
 	/* sanity checking for parameters. */
 	if (g->sect <= 0 ||
 	    g->head <= 0 ||
+	    /* check for zero in F_SECT_PER_TRACK */
+	    (unsigned char)((g->sect << 2) >> FD_SIZECODE(g)) == 0 ||
 	    g->track <= 0 || g->track > UDP->tracks >> STRETCH(g) ||
 	    /* check if reserved bits are set */
 	    (g->stretch & ~(FD_STRETCH | FD_SWAPSIDES | FD_SECTBASEMASK)) != 0)
-- 
2.20.1




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux