Re: [PATCH] bcache: option for recovery from staled data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 9 Sep 2017, Coly Li spake thusly:

> When bcache does read I/Os, for example in writeback or writethrough mode,
> if a read request on cache device is failed, bcache will try to recovery
> the request by reading from cached device. If the data on cached device is
> not synced with cache device, then requester will get a staled data.
>
> For critical storage system like database, recovery from staled data may
> result an application level data corruption, which is unacceptible. But
> for some other situation like multi-media stream cache, continuous service
> may be more important and it is acceptible to fetch a staled chunk of data.
>
> This patch tries to solve the above conflict by adding a sysfs option
> 	/sys/block/bcache<idx>/bcache/recovery_from_staled_data
> which is defaultly cleared (to 0) as disabled. Now people can make choices
> for different situations.

'Staled' is not a word, though perhaps it should be. You probably want
to call it recovery_from_stale_data. But given the description below...

> With this patch, for a failed read request in writeback or writethrough
> mode, recovery a recoverable read request only happens in one of the
> following conditions,
>  - dc->has_dirty is zero. It means all data on cache device is synced to
>    cached device, the recoveried data is up-to-date. 
>  - dc->has_dirty is non-zero, and dc->recovery_from_staled_data is set
>    to 1. It means there is dirty data not synced to cached device yet, but
>    option recovery_from_staled_data is set, receiving staled data is
>    explicitly acceptible for requester.

... this name is also unclear. It sounded to me like it was an option
that recovers *from* stale data (as if the stale data was a problem to
recover from), not an option that uses stale data to *allow* recovery.

Perhaps, instead, something like stale_data_permitted or
allow_stale_data_on_failure would be better?

-- 
NULL && (void)
--
To unsubscribe from this list: send the line "unsubscribe linux-bcache" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux ARM Kernel]     [Linux Filesystem Development]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux