Hey all,
I have a HDA ( cat /proc/interrupts tells me so anyway: snd_hda_intel ).
Its my built-in laptop soundcard, and it works pretty well, down to about 44.1kHz, -p128 -n3. That's ~8ms, which is acceptable IMO.
I've read on mailing list / internet somewhere* that spec for the HDA is pretty open-to-interpretation, so I think the exact hardware / chipset would need to be tested to get true results.
-Harry
*and lost the link..
On Tue, Oct 21, 2014 at 11:14 AM, Patrick Shirkey <pshirkey@xxxxxxxxxxxxxxxxx> wrote:
I have installed Debian but there were issues with the wifi chipset so I
On Tue, October 21, 2014 8:41 pm, Carlos sanchiavedraz wrote:
> 2014-10-21 11:37 GMT+02:00 Patrick Shirkey <pshirkey@xxxxxxxxxxxxxxxxx>:
>
>>
>> On Tue, October 21, 2014 8:27 pm, Carlos sanchiavedraz wrote:
>> > 2014-10-20 17:10 GMT+02:00 Patrick Shirkey
>> <pshirkey@xxxxxxxxxxxxxxxxx>:
>> >
>> >>
>> >> On Mon, October 20, 2014 10:59 pm, Jeremy Jongepier wrote:
>> >> > On 10/20/2014 11:34 AM, Atte wrote:
>> >> >> Dunno about jack, but it seems interesting! However I can't seem
>> to
>> >> find
>> >> >> any prices...
>> >> >
>> >> > These devices are fairly cheap starting from about $50:
>> >> >
>> >>
>> http://www.dx.com/p/ditter-u20-dual-core-android-4-2-google-tv-hd-player-w-1gb-ram-4gb-rom-hdmi-black-300969#.VET43IXSWAs
>> >> >
>> >>
>> >> If you want something that is relatively cheap that can run pianoteq,
>> >> linuxsampler, etc... then you should look into the Intel NUC range.
>> >>
>> >> They provide a very nice piece of gear for a stand alone solution and
>> >> decent responsive support via the OTC forums. I requested a change to
>> >> the
>> >> BIOS and they did it for me as an update.
>> >>
>> >> I have had one for several months as a head for my home entertainment
>> >> center and it is working very well. Yesterday I did some edits with
>> >> ardour2. All I had to do was "apt-get install ardour".
>> >>
>> >> It's not $50 but it is less than $300 for a complete 64 bit x86
>> solution
>> >> including RAM/HDD/SSD. The case is brushed aluminium and it is very
>> >> robust. If you get an SSD it is nearly 100% solid state apart from
>> the
>> >> CPU
>> >> fan which is almost noiseless.
>> >>
>> >> My (cheap) home stereo speaker system generates more noise than the
>> fan
>> >> and I have it running 24/7 for net streaming to TV with full 1080p
>> over
>> >> hdmi.
>> >>
>> >> Saves all the hassle of learning how to cross compile and the general
>> >> issues associated with developing for ARM.
>> >>
>> >> I tried several other options before settling on this one. They were
>> >> cheaper but also more frustrating.
>> >>
>> >> Intel are catching up on ARM these days with the 16/14/12nm fab
>> process.
>> >>
>> >> > That's one of the cheapest I could find with an Allwinner A20
>> chipset.
>> >> > Better would be to get something like a Cubieboard.
>> >> >
>> >>
>> >> --
>> >> Patrick Shirkey
>> >> Boost Hardware Ltd
>> >> _______________________________________________
>> >> Linux-audio-user mailing list
>> >> Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
>> >> http://lists.linuxaudio.org/listinfo/linux-audio-user
>> >>
>> >
>> > That about Intel NUC range sounds really interesting. Which device do
>> you
>> > have, Patrick? I guess the possibilities are one of these:
>> > http://techpartner.intel.com/campaigns/nuc/
>> >
>>
>> I got the cheapest one at the time which was the DNY2820FKH. It has a
>> dual
>> core celeron and 4GB RAM. I think it can take up to 16GB.
>>
>> > Apart from running Ardour, what about RT and IRQs and that stuff?
>> > Thanks Patrick.
>> >
>>
>> The rt config is in place but I haven't really pushed it for audio
>> generation yet. It runs electricsheep and full 1080p video/audio without
>> any issues. I can get about 30fps with 1080p which is decent for viewing
>> but not fast enough for competitive playing.
>>
>> Here is cat /proc/interrupts
>> CPU0 CPU1
>> 0: 26 0 IO-APIC-edge timer
>> 1: 2 0 IO-APIC-edge i8042
>> 8: 1 0 IO-APIC-fasteoi rtc0
>> 9: 0 0 IO-APIC-fasteoi acpi
>> 10: 10801372 0 IO-APIC-edge ite-cir
>> 12: 4 0 IO-APIC-edge i8042
>> 103: 1018511 0 PCI-MSI-edge xhci_hcd
>> 104: 7418719 0 PCI-MSI-edge ahci
>> 105: 113014233 0 PCI-MSI-edge eth0
>> 106: 216595760 0 PCI-MSI-edge i915
>> 107: 373 1604714 PCI-MSI-edge iwlwifi
>> 108: 1368299 0 PCI-MSI-edge snd_hda_intel
>> NMI: 48085 47493 Non-maskable interrupts
>> LOC: 383351941 317871495 Local timer interrupts
>> SPU: 0 0 Spurious interrupts
>> PMI: 48085 47493 Performance monitoring interrupts
>> IWI: 4051038 6083943 IRQ work interrupts
>> RTR: 0 0 APIC ICR read retries
>> RES: 69587463 71022804 Rescheduling interrupts
>> CAL: 427 487 Function call interrupts
>> TLB: 1192097 1158476 TLB shootdowns
>> TRM: 0 0 Thermal event interrupts
>> THR: 0 0 Threshold APIC interrupts
>> MCE: 0 0 Machine check exceptions
>> MCP: 2904 2904 Machine check polls
>> ERR: 0
>> MIS: 0
>>
>>
>>
>>
>>
>>
>> --
>> Patrick Shirkey
>> Boost Hardware Ltd
>> _______________________________________________
>> Linux-audio-user mailing list
>> Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
>> http://lists.linuxaudio.org/listinfo/linux-audio-user
>>
>
> Thanks!
>
> It'll be great if it runs Debian/Musix and if it could be configured for
> RT
> audio.
>
switched to ubuntu which has better support for wifi ootb. Simply because
I didn't want to spend any more time on wifi issues at that point having
just ditched a rockchip device with similar problems. Now I don't use wifi
so I could switch back to debian but seeing as everything is already setup
there is not much motivation.
The realtime config is in place when I installed jack/ardour2. I have not
tested the actual best case latency with jack yet. It works fine with -p
1024 -r48000 -n2. Maybe someone else has latency details on the audio
chipset with other systems? (snd-hda-intel)
I'll try to run some tests when my daughter is not watching teletubbies.
--
Patrick Shirkey
Boost Hardware Ltd
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user
http://www.openavproductions.com
_______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
