On Tue, 30 Sep 2014, Ralf Mardorf wrote:
[rocketmouse@archlinux ~]$ cat /proc/asound/cards
0 [HDSPMx579bcc ]: HDSPM - RME AIO_579bcc
RME AIO S/N 0x579bcc at 0xfddf0000, irq 18
1 [EWX2496 ]: ICE1712 - TerraTec EWX24/96
TerraTec EWX24/96 at 0xbf00, irq 20
2 [EWX2496_1 ]: ICE1712 - TerraTec EWX24/96
TerraTec EWX24/96 at 0xbb00, irq 21
[rocketmouse@archlinux ~]$ amidi -l
Dir Device Name
IO hw:0,0 HDSPMx579bcc MIDI 1
IO hw:1,0 TerraTec EWX24/96 MIDI
IO hw:2,0 TerraTec EWX24/96 MIDI
I don't think you can refer to midi by name in the same way as audio
ports. For example, as above you have hw:2,0 or hw:EWX2496_1, but you can
not use hw:ICE1712 - TerraTec EWX24/96. What I am saying is that EWX2496_1
is a device, not a name or description. MIDI does not have this. However,
qjackctl at least does use the description. So what you want to change is
the description that is shown as "Name" above. The udev rules will be
different than those used to change the device because you are changing a
different part of things. Because of a flood, I don't have access to any
of my MIDI IFs to try things here though.
--
Len Ovens
www.ovenwerks.net
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user
