On Wed, Jul 3, 2013 at 8:43 AM, Jeremy Jongepier <jeremy@xxxxxxxxxxxxxx> wrote:
Nice article Harry! Some remarks though:On 07/03/2013 12:19 AM, Harry van Haaren wrote:
* Is /dev/rtc the kernel timer? I thought it was the device node for
access to the real-time clock. I don't even think it's necessary to
prioritize it anymore because most applications use the kernel timer:
http://wiki.linuxaudio.org/wiki/system_configuration#hardware_timers
I'm far from an expert on timers so I could be wrong, I still find this
a bit of esoteric stuff.
Same here: I wrote that because its in my setup, and AFAIK its the kernel timer... Just found this article: https://www.kernel.org/doc/Documentation/rtc.txt It suggests that /dev/rtc is the "old" RTC, and /dev/rtc0 /dev/rtc1 .. rtcX is the new system. I have got /dev/rtc0 present on my system. I'll investigate into whether JACK / the ALSA backend use /dev/rtc, or if it really isn't used anymore.
* Using setpci in this context is deprecated unless you're still using
am machine with a PCI bus which I highly doubt:
http://wiki.linuxaudio.org/wiki/system_configuration#pci_bus_latency
I was advised on IRC that the PCI bandwidth reset would help, and it didn't negatively influence my machine: hence I added it.
lspci -v -t shows that my firewire, cardbus ("CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller") SD card and multimedia card readers are on the same branch, connected to the root node. I suppose rm-modding those kernel modules would ensure better performance (not using them probably suffices).
lspci -v -t shows that my firewire, cardbus ("CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller") SD card and multimedia card readers are on the same branch, connected to the root node. I suppose rm-modding those kernel modules would ensure better performance (not using them probably suffices).
The graphics chip is on its own node, also connected directly to the root. I don't think it'll get in the way.. Setting the latencies won't hurt, I'll leave it there for now but add a note that on modern hardware its not necessary.
Thanks for the feedback! -Harry
_______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
