Re: Soundcard DSP2000 is not recognized any more

[Chris Bungue <ch.bungue@xxxxxxxxx>]

Hi,
this is the output from
"/var/log/dmesg" after cold boot.
...
[   16.921514] usbcore: registered new interface driver snd-usb-audio
[   16.932523] cannot find the slot for index 0 (range 0-5), error: -16
[   16.932552] snd_ice1712: probe of 0000:01:06.0 failed with error -16
[   17.174258] usb 2-1: USB disconnect, device number 2
[   17.175065] usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd fxload rqt 64 rq 160 len 1 ret -108

when I try to load the driver with "sudo modprobe snd_ice1712" nothing happen in the output of dmesg,
but
"sudo modprobe  snd_ice1712"
WARNING: All config files need .conf: /etc/modprobe.d/sound-cards-order, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/sound-cards-order.save, it will be ignored in a future release.

I have add sound-cards-order to have the soundcard in the right order, because ubuntu like to mixup the order of the soundcards after every reboot :-(

This my sound-cards-order in /etc/modprobe.d
options snd_ice1712 index=0
options snd_usb_audio index=1
options snd_usb_audio index=2
options snd_virmidi index=4

Now I have delete this files and try "sudo modprobe snd_ice1712" again. Ok, now all four LEDs on the DSP2000 are on but  the soundcard is not list in
 /proc/asound/cards
 0 [Device         ]: USB-Audio - PnP Audio Device
                      PnP Audio Device at usb-0000:00:02.0-7, full speed
 1 [M4x4           ]: USB-Audio - MidiSport 4x4
                      M-Audio MidiSport 4x4 at usb-0000:00:02.0-1, full speed
 3 [U0x71040x2202  ]: USB-Audio - USB Device 0x7104:0x2202
                      USB Device 0x7104:0x2202 at usb-0000:00:02.0-4, full speed
 5 [VirMIDI        ]: VirMIDI - VirMIDI
                      Virtual MIDI Card 1

hm .. ,I try some more reboots

thanks

chris

...

2013/4/30 Clemens Ladisch <clemens@xxxxxxxxxx>

Chris Bungue wrote:
> The card appear in the output of lspci but not in /proc/asound/cards.

Are there any messages in the system log (/var/log/messages or the
output of dmesg) after you're trying to load the driver snd-ice1712
(unload it first)?

Regards,
Clemens
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user