On 04/17/2013 09:49 AM, Carlos sanchiavedraz wrote:
2013/4/15 Jeremy Jongepier <jeremy@xxxxxxxxxxxxxx>:
On 04/15/2013 10:39 AM, Carlos sanchiavedraz wrote:
Just a USB cable from RPi to an A/C to USB adapter, and UA25EX
connected direct to the USB on RPi.
Check the current of the adapter, if it's somewhere around 1A you might need
a more powerful adapter as the RPi already draws 700mA IIRC.
The adapter is the same as that ones to charge mobile phones, just an
adapter from USB to a switch. I thought it would be enough to plug the
UA to the RPi and not having to plug it to an USB powered hub, because
then it may occur problems with other devices plugged in it, and this
would probably increase problems with audio latency and such.
I haven't had any problems with audio latency and using a powered hub.
IIRC, when configuring using raspi-config, the Modest preset for
overclocking just increases the CPU freq from 700MHz to 800MHz. I
didn't want to risk my SD because I red that issue you mention, but it
seems that anyway I've left without my SD.
What kind of SD are you using? I've used different SD cards with different
results. I'm now using a cheap OEM class 10 SD card that does get corrupted
quickly but performance is better than other SD cards I've used. Whenever I
change something I make a backup now.
I'm using a SanDisk 2GB microSD on a SD adapter for the RPi slot. I
never had any problem until now.
And that while SanDisk SD's are being recommended for use with the RPi.
What core_freq are you using?
Do you still can use yours once it is corrupted? I plug it, you can
see the two partitions mounted for a moment but then it unmount
itself. I made a backup copy with dd once I configured some
parameters. I've and tried several times to transfer it to the SD with
dd again but at about 840MB transfered it stops with a corruption
error; I only can modify the scripts and config on the first partition
(boot partition) when it stays mounted for some time.
First thing I do when a SD becomes corrupted is wipe all partitions and
then restore an image with dd. If you run into corruption errors the SD
might be defective?
This could allow me to maybe boot a system in a USB stick, but then I
waste one USB slot, and I'm afraid that if I buy another SD card it
could be corrupted again and then it would be wasted money.
You can boot from an USB stick connected to a hub. I've tested this when
trying to run a RT kernel on the RPi. But either my USB stick or the RPi
itself has issues with the throughput because I had the idea the RPi was
a lot less responsive and audio was completely distorted.
Jeremy
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user
