Len Ovens wrote > Looking at the documentation, it seems that there can be up to 4 devices > hooked up to the card. But each one must have a "dip switch" set to a > different number. In the windows driver I do not think it would matter if > the switch was set to 1, 2 ,3 or 4 because that driver knows how to > connect whichever device to the ice1712. The ice1712 has only 8 inputs > however, and so the linux driver only seems to support one device and I > think it has to say it is device one not 2,3 or 4. I think the linux > driver can work with two devices only if one of them is output only and > the other input only. Reading > http://forums.debian.net/viewtopic.php?f=7&t=79456 tells me that your > input lights should be on to get audio input... they do work in Linux with > the alsa driver. I also notice that he says he realizes the external box > must be set to device number one. Have you checked that? BINGO! About five years ago, this unit was deployed as part of a 24 channel audio rack. Checking the switches, this unit had the dip switch set to 1111000000. I set it to 1000000000 and the LEDs lit up, all 8 channels are receiving input. I guess the OEM drivers don't care what value the switches are, as long as all the units have different values. FYI No analog volume tab shows up - the audio is coming in on the monitor input tabs on the envy24 mixer. Thanks for your help CjD -- View this message in context: http://linux-audio.4202.n7.nabble.com/Envy24Control-is-missing-the-Analog-Volume-tab-need-guidance-tp79131p79182.html Sent from the linux-audio-user mailing list archive at Nabble.com. _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
