On Sun, November 4, 2012 4:20 pm, cullenspub wrote: > Tim, > > First thanks for the reply - I would love the be a test case. > > I checked out the latest trunk version (14), compiled it with default > options and gave it a try. Still no Analog tab. :( The about tab shows > Envy Control 1.1.0.14. Both the Monitor Inputs and Monitor PCMs tabs show > the text "(off)" under all the meters. Is this expected? Any other > thoughts? Yes, it is expected. The off means no signal has made a peak high enough to read. Once a signal is there it will read in -xx.x up to 0db as the peak signal since last reset. I find it odd that the Analog Volume is not there. It does sound like you can get audio out though. Do you have the Patchbay/Router tab? Does it show 10 outputs? (my d66 shows outputs 1-4 and 9-10) but I found I got no output till I raised the analog controls either. Another program to try for trouble shooting is qasHctl which gives a list of everything ALSA found for your card in a tree like structure. On the right side select hw:Card and 0: or whatever card number you are using. On the left side under mixer see what is listed there. Anything with "multi Capture" or "multi Playback" in it is the monitor mixer. Look for other sets of 10. I wonder if 1.1.* has fixed the profile saving... -- Len Ovens www.OvenWerks.net _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
