Len Ovens wrote > Do you have the Patchbay/Router tab? Does it show 10 outputs? > (my d66 shows outputs 1-4 and 9-10) but I found I got no output till > I raised the analog controls either. > > Another program to try for trouble shooting is qasHctl which gives a list > of everything ALSA found for your card in a tree like structure. On the > right side select hw:Card and 0: or whatever card number you are using. On > the left side under mixer see what is listed there. Anything with "multi > Capture" or "multi Playback" in it is the monitor mixer. Look for other > sets of 10. Len Using mudita24, I have the Patchbay / Router tab. It shows 8 H/W OUT columns (1-8) and two S/PDIF Out Columns (L)and (R). Nothing in mudita24 is labeled "multi Playback". Using qasHctl, I do see a set of 8 controls called - HW Multi Capture Switch[8] (buttons all set to ch 0.) - HW Multi Capture Volume[8] (sliders all set at 80) Using QasMixer , I see the following channel sliders on the input screen (when I select the picture of mic) 2 Sliders Labeled: IEC958 Multi, 0 - IEC958 Multi, 1 1 Slider Labeled: Capture 8 Sliders Labeled: H/W Multi,0 - H/W Multi,7 1 Slider Labeled: Multi Track Volume All are turned on and up. Cullen -- View this message in context: http://linux-audio.4202.n7.nabble.com/Envy24Control-is-missing-the-Analog-Volume-tab-need-guidance-tp79131p79157.html Sent from the linux-audio-user mailing list archive at Nabble.com. _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
