On 10 September 2012 at 18:50, "Len Ovens" <len@xxxxxxxxxxxxx> wrote: > On Mon, September 10, 2012 5:57 pm, Kevin Cosgrove wrote: > > On 10 September 2012 at 15:14, Paul Davis <paul@xxxxxxxxxxxxxxxxxxxxx> > > wrote: > > > >> > A few years back I was using my BCF2000 with ardour. After upgrades > >> > to my computer hardware and Linux distribution the combination no > >> > longer works. > >> > > >> > The BCF shows up in /proc/asound fine. I can send and receive data > >> > with the BCF using amidi. > >> > > >> > The test of tracing communication between the BCF and ardour fails. > >> > I think this is because the mcu (port?) of ardour isn't connected to > >> > the BCF. But, qjackctl won't let me connect those. They don't > >> > show up in the MIDI tab of qjackctl. They only show up in the ALSA > >> > tab of qjackctl. > >> > > >> > >> run a2jmidid -e > > > Right now MIDI Driver is set to "raw". I'm not sure when or if > > I set that, or whether it might be the default. > > Try none. Raw takes the place of a2j With "seq" or with "none", then not only can I see the MIDI (not just ALSA) ports in qjackctl, but I can connect them. Setting the MIDI-Driver to "none" and using "a2jmidid -e" I get this out of a2jmidid: JACK MIDI <-> ALSA sequencer MIDI bridge, version 6 (a500771941cd42419a2418ee28259cde718a82bb) built on Wed Dec 31 16:00:00 1969 Copyright 2006,2007 Dmitry S. Baikov Copyright 2007,2008,2009 Nedko Arnaudov Bridge starting... Using JACK server 'default' Hardware ports will be exported. Cannot lock down memory area (Cannot allocate memory) Bridge started Press ctrl-c to stop the bridge port created: Midi Through [14] (capture): Midi Through Port-0 port created: Midi Through [14] (playback): Midi Through Port-0 port created: M Audio Delta 1010 [20] (capture): M Audio Delta 1010 MIDI port created: M Audio Delta 1010 [20] (playback): M Audio Delta 1010 MIDI port created: BCF2000 [24] (capture): BCF2000 MIDI 1 port created: BCF2000 [24] (playback): BCF2000 MIDI 1 port created: BCF2000 [24] (capture): BCF2000 MIDI 2 port created: BCF2000 [24] (playback): BCF2000 MIDI 2 port created: ardour [129] (capture): control port created: ardour [129] (playback): control port created: ardour [129] (capture): mcu port created: ardour [129] (playback): mcu port created: ardour [129] (capture): seq port created: ardour [129] (playback): seq port deleted: ardour [129] (capture): control port deleted: ardour [129] (capture): mcu port deleted: ardour [129] (capture): seq port deleted: ardour [129] (playback): control port deleted: ardour [129] (playback): mcu port deleted: ardour [129] (playback): seq port created: ardour [129] (capture): control port created: ardour [129] (playback): control port created: ardour [129] (capture): mcu port created: ardour [129] (playback): mcu port created: ardour [129] (capture): seq port created: ardour [129] (playback): seq port deleted: ardour [129] (capture): control port deleted: ardour [129] (capture): mcu port deleted: ardour [129] (capture): seq port deleted: ardour [129] (playback): control port deleted: ardour [129] (playback): mcu port deleted: ardour [129] (playback): seq That looks good to me. Setting the MIDI-Driver to "seq" also has no errors. Next I set ardour's conrol surface to Mackie. Ardour stalled for a bit, then produced the following text in the window where I started ardour: MackiePort::connect_any already connected MackiePort::connect_any already connected MackiePort::connect_any already connected mcu input: Channel mcu output: Channel 1 NoteOn NoteNum 32 Vel 01 NoteOn NoteNum 32 Vel 0 mcu input: Channel 1 NoteOn NoteNum 16 Vel 127 mcu output: Channel 1 NoteOn NoteNum 16 Vel 127 mcu input: Channel 1 Pitch Bend 7887 mcu output: Channel 1 Pitch Bend 7887 mcu output: System Exclusive (15) = [ f0 0 0 66 10 12 0 6b 69 63 6b 20 20 20 f7 ] mcu output: System Exclusive (15) = [ f0 0 0 66 10 12 38 20 20 20 20 20 20 20 f7 ] mcu output: Channel 1 Controller 48 Value 70 mcu output: Channel 1 NoteOn NoteNum 24 Vel 0 mcu output: Channel 1 NoteOn NoteNum 33 Vel 0 mcu output: Channel 1 NoteOn NoteNum 17 Vel 127 mcu output: Channel 2 Pitch Bend 7893 mcu output: System Exclusive (15) = [ f0 0 0 66 10 12 7 73 6e 61 72 65 20 20 f7 ] mcu output: System Exclusive (15) = [ f0 0 0 66 10 12 3f 20 20 20 20 20 20 20 f7 ] mcu output: Channel 1 Controller 49 Value 70 mcu output: Channel 1 NoteOn NoteNum 25 Vel 0 mcu output: Channel 1 NoteOn NoteNum 34 Vel 0 mcu output: Channel 1 NoteOn NoteNum 18 Vel 127 mcu output: Channel 3 Pitch Bend 7893 mcu output: System Exclusive (15) = [ f0 0 0 66 10 12 e 74 6f 6d 73 4c 20 20 f7 ] mcu output: System Exclusive (15) = [ f0 0 0 66 10 12 46 20 20 20 20 20 20 20 f7 ] mcu output: Channel 1 Controller 50 Value 70 mcu output: Channel 1 NoteOn NoteNum 26 Vel 0 mcu output: Channel 1 NoteOn NoteNum 35 Vel 0 mcu output: Channel 1 NoteOn NoteNum 19 Vel 127 mcu output: Channel 4 Pitch Bend 7893 mcu output: System Exclusive (15) = [ f0 0 0 66 10 12 15 74 6f 6d 73 43 20 20 f7 ] mcu output: System Exclusive (15) = [ f0 0 0 66 10 12 4d 20 20 20 20 20 20 20 f7 ] mcu output: Channel 1 Controller 51 Value 70 mcu output: Channel 1 NoteOn NoteNum 27 Vel 0 mcu output: Channel 1 NoteOn NoteNum 36 Vel 0 mcu output: Channel 1 NoteOn NoteNum 20 Vel 127 mcu output: Channel 5 Pitch Bend 7893 mcu output: System Exclusive (15) = [ f0 0 0 66 10 12 1c 74 6f 6d 73 52 20 20 f7 ] mcu output: System Exclusive (15) = [ f0 0 0 66 10 12 54 20 20 20 20 20 20 20 f7 ] mcu output: Channel 1 Controller 52 Value 70 mcu output: Channel 1 NoteOn NoteNum 28 Vel 0 mcu output: Channel 1 NoteOn NoteNum 37 Vel 0 mcu output: Channel 1 NoteOn NoteNum 21 Vel 127 mcu output: Channel 6 Pitch Bend 7893 mcu output: System Exclusive (15) = [ f0 0 0 66 10 12 23 68 69 68 61 74 20 20 f7 ] mcu output: System Exclusive (15) = [ f0 0 0 66 10 12 5b 20 20 20 20 20 20 20 f7 ] mcu output: Channel 1 Controller 53 Value 70 mcu output: Channel 1 NoteOn NoteNum 29 Vel 0 mcu output: Channel 1 NoteOn NoteNum 38 Vel 0 mcu output: Channel 1 NoteOn NoteNum 22 Vel 127 mcu output: Channel 7 Pitch Bend 7893 mcu output: System Exclusive (15) = [ f0 0 0 66 10 12 2a 6f 68 4c 20 20 20 20 f7 ] mcu output: System Exclusive (15) = [ f0 0 0 66 10 12 62 20 20 20 20 20 20 20 f7 ] mcu output: Channel 1 Controller 54 Value 70 mcu output: Channel 1 NoteOn NoteNum 30 Vel 0 mcu output: Channel 1 Controller 74 Value 82 mcu output: Channel 1 Controller 75 Value 65 mcu output: Channel 1 NoteOn NoteNum 23 Vel 0 mcu output: Channel 8 Pitch Bend 12349 mcu output: Channel 1 Controller 55 Value 0 mcu output: Channel 1 NoteOn NoteNum 31 Vel 0 mcu output: Channel 1 NoteOn NoteNum 94 Vel 0 mcu output: Channel 1 NoteOn NoteNum 93 Vel 127 mcu output: Channel 1 NoteOn NoteNum 70 Vel 0 mcu output: Channel 1 NoteOn NoteNum 31 Vel 0 mcu output: Channel 1 NoteOn NoteNum 114 Vel 127 mcu output: Channel 1 NoteOn NoteNum 113 Vel 0 mcu input: Channel 1 NoteOn NoteNum 110 Vel 127 mcu input: Channel 7 Pitch Bend 7744 mcu input: Channel 7 Pitch Bend 7600 mcu input: Channel 7 Pitch Bend 7536 mcu input: Channel 7 Pitch Bend 7456 mcu input: Channel 7 Pitch Bend 7360 mcu input: Channel 7 Pitch Bend 7280 mcu input: Channel 7 Pitch Bend 7216 mcu input: Channel 7 Pitch Bend 7088 mcu input: Channel 7 Pitch Bend 7040 mcu input: Channel 7 Pitch Bend 6976 mcu input: Channel 7 Pitch Bend 6864 mcu input: Channel 7 Pitch Bend 6736 mcu input: Channel 7 Pitch Bend 6512 mcu input: Channel 7 Pitch Bend 6464 mcu input: Channel 7 Pitch Bend 6352 mcu input: Channel 7 Pitch Bend 6336 Segmentation fault Well, at least they're communicating. Does this ring a bell with someone? How to proceed from here? Thanks again..... -- Kevin _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
