On Mon, September 10, 2012 5:57 pm, Kevin Cosgrove wrote: > On 10 September 2012 at 15:14, Paul Davis <paul@xxxxxxxxxxxxxxxxxxxxx> wrote: > >> > A few years back I was using my BCF2000 with ardour. After upgrades to my computer hardware and Linux distribution the combination no longer works. >> > >> > The BCF shows up in /proc/asound fine. I can send and receive data with the BCF using amidi. >> > >> > The test of tracing communication between the BCF and ardour fails. I think this is because the mcu (port?) of ardour isn't connected to the BCF. But, qjackctl won't let me connect those. They don't show up in the MIDI tab of qjackctl. They only show up in the ALSA tab of qjackctl. >> > >> >> run a2jmidid -e > Right now MIDI Driver is set to "raw". I'm not sure when or if > I set that, or whether it might be the default. Try none. Raw takes the place of a2j -- Len Ovens www.OvenWerks.net -- Len Ovens www.OvenWerks.net _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
