Re: starting pd-extended 0.42.5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



To be honest, it's been so long since I've had my head in PD that I can't even remember what all of the pieces of my fiddle script is doing (that's another email for another list, I think....)

But let's say I just want to start pd like this:
pdextended -jack channels 2

Within PD, when I click on 'test audio and midi', I get the following DIO errors in pd along with no test tone (after I select "60", of course) :
error: channels: can't open
error: 2: can't open
audio I/O error history:
seconds ago    error type
    70.39    unknown
    70.39    unknown
warning: tone-osc: multiply defined
warning: tone-mon: multiply defined
warning: tone-osc: multiply defined
warning: tone-mon: multiply defined
warning: tone-osc: multiply defined

No messages within Jack regarding any of this.

Here's my Jack log:

Sun Aug 21 11:09:33 2011: Loading settings from "/home/aaron/.config/jack/conf.xml" using expat_2.0.1 ...

Sun Aug 21 11:09:33 2011: setting engine option "driver" to value "alsa"

Sun Aug 21 11:09:33 2011: driver "alsa" selected

Sun Aug 21 11:09:33 2011: setting engine option "realtime" to value "false"

Sun Aug 21 11:09:33 2011: setting engine option "verbose" to value "false"

Sun Aug 21 11:09:33 2011: setting engine option "client-timeout" to value "500"

Sun Aug 21 11:09:33 2011: setting for driver "net" found

Sun Aug 21 11:09:33 2011: setting for driver "dummy" found

Sun Aug 21 11:09:33 2011: setting for driver "alsa" found

Sun Aug 21 11:09:33 2011: setting driver option "device" to value "hw:0"

Sun Aug 21 11:09:33 2011: setting driver option "rate" to value "44100"

Sun Aug 21 11:09:33 2011: setting driver option "period" to value "1024"

Sun Aug 21 11:09:33 2011: setting driver option "nperiods" to value "3"

Sun Aug 21 11:09:33 2011: setting driver option "hwmon" to value "false"

Sun Aug 21 11:09:33 2011: setting driver option "hwmeter" to value "false"

Sun Aug 21 11:09:33 2011: setting driver option "duplex" to value "true"

Sun Aug 21 11:09:33 2011: setting driver option "softmode" to value "false"

Sun Aug 21 11:09:33 2011: setting driver option "monitor" to value "false"

Sun Aug 21 11:09:33 2011: setting driver option "dither" to value "n"

Sun Aug 21 11:09:33 2011: setting driver option "shorts" to value "false"

Sun Aug 21 11:09:33 2011: setting for driver "loopback" found

Sun Aug 21 11:09:33 2011: setting for driver "netone" found

Sun Aug 21 11:09:33 2011: setting for driver "firewire" found

Sun Aug 21 11:09:33 2011: setting for internal "netmanager" found

Sun Aug 21 11:09:33 2011: setting for internal "profiler" found

Sun Aug 21 11:09:33 2011: setting for internal "audioadapter" found

Sun Aug 21 11:09:33 2011: setting for internal "netadapter" found

Sun Aug 21 11:09:33 2011: Listening for D-Bus messages

Sun Aug 21 11:09:42 2011: ------------------

Sun Aug 21 11:09:42 2011: Controller activated. Version 1.9.7 (4236) built on Thu Jun 16 13:33:27 2011

Sun Aug 21 11:09:42 2011: Loading settings from "/home/aaron/.config/jack/conf.xml" using expat_2.0.1 ...

Sun Aug 21 11:09:42 2011: setting engine option "driver" to value "alsa"

Sun Aug 21 11:09:42 2011: driver "alsa" selected

Sun Aug 21 11:09:42 2011: setting engine option "realtime" to value "false"

Sun Aug 21 11:09:42 2011: setting engine option "verbose" to value "false"

Sun Aug 21 11:09:42 2011: setting engine option "client-timeout" to value "500"

Sun Aug 21 11:09:42 2011: setting for driver "net" found

Sun Aug 21 11:09:42 2011: setting for driver "dummy" found

Sun Aug 21 11:09:42 2011: setting for driver "alsa" found

Sun Aug 21 11:09:42 2011: setting driver option "device" to value "hw:0"

Sun Aug 21 11:09:42 2011: setting driver option "rate" to value "44100"

Sun Aug 21 11:09:42 2011: setting driver option "period" to value "1024"

Sun Aug 21 11:09:42 2011: setting driver option "nperiods" to value "3"

Sun Aug 21 11:09:42 2011: setting driver option "hwmon" to value "false"

Sun Aug 21 11:09:42 2011: setting driver option "hwmeter" to value "false"

Sun Aug 21 11:09:42 2011: setting driver option "duplex" to value "true"

Sun Aug 21 11:09:42 2011: setting driver option "softmode" to value "false"

Sun Aug 21 11:09:42 2011: setting driver option "monitor" to value "false"

Sun Aug 21 11:09:42 2011: setting driver option "dither" to value "n"

Sun Aug 21 11:09:42 2011: setting driver option "shorts" to value "false"

Sun Aug 21 11:09:42 2011: setting for driver "loopback" found

Sun Aug 21 11:09:42 2011: setting for driver "netone" found

Sun Aug 21 11:09:42 2011: setting for driver "firewire" found

Sun Aug 21 11:09:42 2011: setting for internal "netmanager" found

Sun Aug 21 11:09:42 2011: setting for internal "profiler" found

Sun Aug 21 11:09:42 2011: setting for internal "audioadapter" found

Sun Aug 21 11:09:42 2011: setting for internal "netadapter" found

Sun Aug 21 11:09:42 2011: Listening for D-Bus messages

Sun Aug 21 11:09:47 2011: Starting jack server...

Sun Aug 21 11:09:47 2011: JACK server starting in non-realtime mode

11:09:47.801 D-BUS: JACK server was started (org.jackaudio.service aka jackdbus).

11:09:48.054 ALSA connection graph change.

Sun Aug 21 11:09:47 2011: control device hw:0

Sun Aug 21 11:09:47 2011: control device hw:0

Sun Aug 21 11:09:47 2011: Acquired audio card Audio0

Sun Aug 21 11:09:47 2011: creating alsa driver ... hw:0|hw:0|1024|3|44100|0|0|nomon|swmeter|-|32bit

Sun Aug 21 11:09:47 2011: control device hw:0

Sun Aug 21 11:09:47 2011: configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 3 periods

Sun Aug 21 11:09:47 2011: ALSA: final selected sample format for capture: 16bit little-endian

Sun Aug 21 11:09:47 2011: ALSA: use 3 periods for capture

Sun Aug 21 11:09:47 2011: ALSA: final selected sample format for playback: 32bit integer little-endian

Sun Aug 21 11:09:47 2011: ALSA: use 3 periods for playback

Sun Aug 21 11:09:47 2011: graph reorder: new port 'system:capture_1'

Sun Aug 21 11:09:47 2011: New client 'system' with PID 0

Sun Aug 21 11:09:47 2011: graph reorder: new port 'system:capture_2'

Sun Aug 21 11:09:47 2011: graph reorder: new port 'system:playback_1'

Sun Aug 21 11:09:47 2011: graph reorder: new port 'system:playback_2'

Sun Aug 21 11:09:47 2011: New client 'cadence' with PID 22834

Sun Aug 21 11:09:48 2011: New client 'a2j' with PID 23755

Sun Aug 21 11:09:48 2011: New client 'PulseAudio JACK Sink' with PID 23814

Sun Aug 21 11:09:48 2011: Connecting 'PulseAudio JACK Sink:front-left' to 'system:playback_1'

Sun Aug 21 11:09:48 2011: Connecting 'PulseAudio JACK Sink:front-right' to 'system:playback_2'

Sun Aug 21 11:09:48 2011: New client 'PulseAudio JACK Source' with PID 23814

Sun Aug 21 11:09:48 2011: Connecting 'system:capture_1' to 'PulseAudio JACK Source:front-left'

Sun Aug 21 11:09:48 2011: Connecting 'system:capture_2' to 'PulseAudio JACK Source:front-right'

11:09:49.960 Statistics reset.

11:09:49.979 Client activated.

11:09:50.016 JACK connection graph change.

Sun Aug 21 11:09:49 2011: New client 'qjackctl' with PID 5754



Thanks, all.


-Aaron









On Sun, Aug 21, 2011 at 10:47 AM, <harryhaaren@xxxxxxxxx> wrote:
Pasuspender is a way to make PulseAudio let go of the soundcard when JACK wants to access it. This *is* nessisary on systems where Pulse is the main sound daemon, but as KX uses JACK for all its audio needs, it will not have any effect.

"Error: 2: can't open" did catch my eye though, are you passing any special arguments to your "dac~" in the patch? like "dac~ 1 2" or something to open the first & second channel? I've had problems there before, either because it did (or did *not*) start from 0. Can't remember the details, but perhaps that's it?

-Harry

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user

[Index of Archives]     [Linux Sound]     [ALSA Users]     [Pulse Audio]     [ALSA Devel]     [Sox Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux