On Tue, Nov 30, 2010 at 9:38 AM, Kim Cascone <kim@xxxxxxxxxxxxxxxxx> wrote: <SNIP> >> The biggest issue with 1394 on Linux is the 1394 controller in the PC. >> You might look around for evidence that your specific hardware (the >> chip inside - not the laptop) is well supported. (I.e - TI is, others >> vary) Stefan Richter in the 1394 user list is a great resource. lspci >> is your friend. >> > > yeah I did a lspci and found: > > 09:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev > 05) > > -- also -- > > sudo lshw | grep 1394 > Â Â Â Â Â Â Â description: FireWire (IEEE 1394) > Â Â Â Â Â Â Â product: R5C832 IEEE 1394 Controller > Â Â Â Â Â Â Â configuration: driver=ohci1394 latency=32 maxlatency=4 > mingnt=2 module=ohci1394 OK, as it's Ricoh which is a brand known to have a few problems over the years I would consider doing a little Googling or better yet subscribe to the Linux 1394-user group and ask on there about any specific things you should need to know. Note that there are now two 1394 stacks in the kernel. (Have been for a while...) Depending on which one you choose you use different drivers and get slightly different results. I only mention this because in distro kernels they choose different ones and this may be an issue for you. I strongly suggest building your own kernels if you're going to use 1394 as then you'll be able to take full advantage of info you get from other users about setup. Of course, maybe it will just work and there won't be any issues at all! ;-) Cheers, Mark _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
