you could uncouple them using (soft) rubber or springs. Those would absorb the vibrations. It would be most practicly placing them on the ground or a surface. You have to take care that frequency-resonance of the material is lower than the lowest the speaker produces - you can test that puxing them down and guessing the freuquency by the up and down movements. sorry, I hope one can understand my bad english Fabio Em terça-feira 16 novembro 2010, às 16:10:32, Philipp escreveu: > Hi there, > I need to reduce the loudness in every room except the one with > speakers. The issue seems to be mainly bass frequencies, which is hardly > a surprise. Physically decoupling the speakers from the walls would be > the most appropriate solution in this specific case. Currently some > speakers hang while some sit on wall-mounted boards. > > What's the best but still reasonably easy/cheap way to decouple the > speakers? > > My guesses so far: > a) hanging is better than wall-mounted boards > b) decoupling actually helps, at least a bit > > TIA for any comments > > Regards, > Philipp > > _______________________________________________ > Linux-audio-user mailing list > Linux-audio-user@xxxxxxxxxxxxxxxxxxxx > http://lists.linuxaudio.org/listinfo/linux-audio-user > |
_______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user