Andre Majorel wrote: > On 2008-06-02 10:35 +0200, Clemens Ladisch wrote: > > Andre Majorel wrote: > > > - MOTU MIDI Timepiece (around 600 EUR) > > > - MOTU Express XT (around 400 EUR) > > > - MOTU MIDI Express 128 (around 200 EUR) > > > > > > I've heard complaints about the latency of the MOTU interfaces. > > > How is it under Linux ? > > > > Under Linux, these devices have infinite latency, i.e., they do > > not work at all. If somebody were to write a driver, the > > latency would be about as high as in other OSes. > > How do you know ? The latency could be in MOTU's drivers. MOTU's devices use the "isochronous" transfer type which requires that all transfers must be scheduled in advance, i.e., the driver has to tell the host controller driver when a packet should be sent. If the scheduled time of a packet is not in the future, the host controller driver drops the packet without informing the MIDI driver, so all MIDI packets must be scheduled with a certain latency to ensure that they are actually sent. Isochronous transfers are intended for things like PCM audio where it would not make sense to send packets later than at their scheduled time. All other MIDI devices use bulk transfers, which do not guarantee a specific delivery time but which are sent as fast as possible. > The innards of the AMT8 are interesting. It contains an EPROM but > no microprocessor that I can see, just a couple of FPGA. There should be some USB interface chip, and most of those include some 8-bit microprocessor. Regards, Clemens _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
