Am Donnerstag, 22. November 2007 schrieb lanas: > Folks, > > I'm connecting an accoustic bass guitar that has an internal pickup > to a 1010LT card (inout 3 for instance) using a 1/4" cable and a 1/4" > to RCA converter. The guitar has volume, bass, treeble controls. > Unless I crank up the guitar's volume to the max there's no much sound > that goes in. The appropriate ADC channel setting in Envy24 is at the > max. If it has controls for volume, treble and bass that means it has an amplifier on board. Maybe the battery is low? > > Pushing the volume to the max also brings noise with it. What I > would like to do is to set it at about 5-6 and have some room in Ardour. > > Does this mean that I have to plug some kind of impedence adapter > between the guitar and the 1010LT ? > > Thanks, > > Al > _______________________________________________ > Linux-audio-user mailing list > Linux-audio-user@xxxxxxxxxxxxxxxxxxxx > http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user > > Edgar _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
