-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Tue, Oct 02, 2007 at 11:21:36AM +0200, Marcos Guglielmetti wrote: > Hi! > > We are testing an USB-Audio - FastTrack Pro using Musix GNU/Linux (Debian/ETCH > compatible) on a Toshiba Notebook, Genuine Intel(R) CPU T2060 @ 1.60GHz > (dual core) > > Linux Musix 2.6.21 #1 SMP PREEMPT Fri Apr 27 18:08:33 EEST 2007 i686 GNU/Linux > > amixer -i -c 0 does not output anything. Also, gamix, gnome-alsamixer, > alsamixer, alsamixergui, kmix, etc: nothing. > > Jackd starts Ok (and with noxruns running at lower latencies) using hw:0, > hw:0,1 (or so, I dont remember right now), It can play and record, but the > mic input is too loud, and we can not control any souncards's input/outputs > from the OS. > > Is there a software mixer for an USB-Audio - FastTrack Pro? > > > The ALSA modules: > > snd_hda_intel 24344 0 > snd_hda_codec 202496 1 snd_hda_intel > snd_usb_audio 78560 0 > snd_pcm_oss 43424 0 > snd_mixer_oss 19712 1 snd_pcm_oss > snd_pcm 76292 4 > snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_pcm_oss > snd_page_alloc 13704 2 snd_hda_intel,snd_pcm > snd_usb_lib 19328 1 snd_usb_audio > snd_hwdep 12932 1 snd_usb_audio > snd_seq_dummy 7940 0 > snd_seq_oss 33664 0 > snd_seq_midi 12320 0 > snd_rawmidi 26656 2 snd_usb_lib,snd_seq_midi > snd_seq_midi_event 11136 2 snd_seq_oss,snd_seq_midi > snd_seq 50896 6 > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event > snd_timer 25220 2 snd_pcm,snd_seq > snd_seq_device 11788 5 > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq > snd 53092 12 > snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > soundcore 12000 1 snd > usbcore 128264 9 > snd_usb_audio,snd_usb_lib,usb_storage,usbhid,libusual,ohci_hcd,uhci_hcd,ehci_hcd > > > > cat /proc/asound/cards > 0 [Pro ]: USB-Audio - FastTrack Pro > M-Audio FastTrack Pro at usb-0000:00:13.0-2, full speed > > > > > lspci -nv > > _________________________________________ > 00:00.0 0600: 1002:5a31 (rev 01) > Subsystem: 1179:ff00 > Flags: bus master, 66MHz, medium devsel, latency 64 > > 00:01.0 0604: 1002:5a3f (prog-if 00 [Normal decode]) > Flags: bus master, 66MHz, medium devsel, latency 64 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > I/O behind bridge: 00009000-00009fff > Memory behind bridge: d0000000-d00fffff > Prefetchable memory behind bridge: d8000000-dfffffff > Capabilities: [b0] Subsystem: 1179:ff00 > > 00:06.0 0604: 1002:5a38 (prog-if 00 [Normal decode]) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=02, subordinate=07, sec-latency=0 > Memory behind bridge: d0100000-d01fffff > Capabilities: [50] Power Management version 3 > Capabilities: [58] Express Root Port (Slot+) IRQ 0 > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable- > Capabilities: [b0] Subsystem: 1002:5a31 > Capabilities: [b8] HyperTransport: MSI Mapping > > 00:12.0 0101: 1002:4379 (rev 80) (prog-if 8f [Master SecP SecO PriP PriO]) > Subsystem: 1179:ff00 > Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 > I/O ports at 8440 [size=8] > I/O ports at 8430 [size=4] > I/O ports at 8420 [size=8] > I/O ports at 8410 [size=4] > I/O ports at 8400 [size=16] > Memory at d0507000 (32-bit, non-prefetchable) [size=512] > [virtual] Expansion ROM at 20000000 [disabled] [size=512K] > Capabilities: [60] Power Management version 2 > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable- > > 00:13.0 0c03: 1002:4374 (rev 80) (prog-if 10 [OHCI]) > Subsystem: 1179:ff00 > Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19 > Memory at d0504000 (32-bit, non-prefetchable) [size=4K] > > 00:13.1 0c03: 1002:4375 (rev 80) (prog-if 10 [OHCI]) > Subsystem: 1179:ff00 > Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19 > Memory at d0505000 (32-bit, non-prefetchable) [size=4K] > > 00:13.2 0c03: 1002:4373 (rev 80) (prog-if 20 [EHCI]) > Subsystem: 1179:ff00 > Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19 > Memory at d0506000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [dc] Power Management version 2 > > 00:14.0 0c05: 1002:4372 (rev 82) > Subsystem: 1179:ff00 > Flags: 66MHz, medium devsel > I/O ports at 8450 [size=16] > Memory at d0507400 (32-bit, non-prefetchable) [size=1K] > > 00:14.1 0101: 1002:4376 (rev 80) (prog-if 88 [Master SecP]) > Subsystem: 1179:ff00 > Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17 > I/O ports at 01f0 [size=8] > I/O ports at 03f4 [size=1] > I/O ports at 0170 [size=8] > I/O ports at 0374 [size=1] > I/O ports at 8460 [size=16] > Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable- > > 00:14.2 0403: 1002:437b (rev 01) > Subsystem: 1179:ff00 > Flags: slow devsel, IRQ 17 > Memory at d0500000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 > Enable- > > 00:14.3 0601: 1002:4377 (rev 80) > Subsystem: 1179:ff00 > Flags: bus master, 66MHz, medium devsel, latency 0 > > 00:14.4 0604: 1002:4371 (rev 80) (prog-if 01 [Subtractive decode]) > Flags: bus master, 66MHz, medium devsel, latency 64 > Bus: primary=00, secondary=09, subordinate=0e, sec-latency=64 > I/O behind bridge: 0000a000-0000afff > Memory behind bridge: f0200000-f02fffff > Prefetchable memory behind bridge: f0300000-f03fffff > > 01:05.0 0300: 1002:5a62 (prog-if 00 [VGA]) > Subsystem: 1179:ff04 > Flags: bus master, 66MHz, medium devsel, latency 66, IRQ 11 > Memory at d8000000 (32-bit, prefetchable) [size=128M] > I/O ports at 9000 [size=256] > Memory at d0000000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at d0020000 [disabled] [size=128K] > Capabilities: [50] Power Management version 2 > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable- > > 02:00.0 0200: 168c:001c (rev 01) > Subsystem: 144f:7106 > Flags: bus master, fast devsel, latency 0, IRQ 20 > Memory at d0100000 (64-bit, non-prefetchable) [size=64K] > Capabilities: [40] Power Management version 2 > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable- > Capabilities: [60] Express Legacy Endpoint IRQ 0 > Capabilities: [90] MSI-X: Enable- Mask- TabSize=1 > Capabilities: [100] Advanced Error Reporting > Capabilities: [140] Virtual Channel > > 09:04.0 0607: 1524:1410 (rev 01) > Subsystem: 1179:ff00 > Flags: bus master, medium devsel, latency 168, IRQ 16 > Memory at f0200000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=09, secondary=0a, subordinate=0d, sec-latency=176 > Memory window 0: 24000000-27fff000 (prefetchable) > Memory window 1: 28000000-2bfff000 > I/O window 0: 0000a400-0000a4ff > I/O window 1: 0000a800-0000a8ff > 16-bit legacy interface ports at 0001 > > 09:06.0 0200: 10ec:8139 (rev 10) > Subsystem: 1179:ff00 > Flags: bus master, medium devsel, latency 64, IRQ 18 > I/O ports at a000 [size=256] > Memory at d0200000 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > > > > > > If you need more info, just tell us, thanks. > > > > Regards. > > > > > El Martes, 2 de Octubre de 2007 15:31, Matias Marzetti escribi?: > | Probe y no aparece nada, incluso vi que en el menu de musix, en la parte > | de mixer probe abrir el gmix y lo abre pero aparece vacio, el alsamixer, o > | los comandos que me decis que tipee en la conosa no hacen nada... > | o sea con alsamixer no se abre nada nuevo solo ejecuta el comando, con > | amixer -i -c 0 como que ejecuta el comando pero no aparece nada, con las > | otras dos dice que no hay dispositivo en esa direccion o algo asi. > | > | alguna otra idea? > | > | > | ----- Original Message ----- > | From: "Marcos Guglielmetti" <marcospcmusica@xxxxxxxxx> > | To: "klondike" <franxisco1988@xxxxxxxxx> > | Cc: "Matias Marzetti" <MARZE2K@xxxxxxxxxxxx> > | Sent: Monday, October 01, 2007 2:32 PM > | Subject: Re: [Alsa-user] software mixer for an USB-Audio - FastTrack Pro? > | > | El Martes, 2 de Octubre de 2007 00:21, klondike escribi?: > | | Just try "amixer -i -c n" replacing n for the number your card has, it > | | may show all the controls that card has so if that doesn't work, then > | | I can't do more for you, so you may wait for other person to help you. > | | > | | Ten una buena noche ;) > | > | Gracias Franxisco. > | > | Mat?as, podr?as abrir una consola y escribir: > | > | amixer -i -c 0 > | > | amixer -i -c 0,0 > | > | amixer -i -c 1,0 > | > | Fijate. > | > | Tambi?n, Mat?as, te aconsejo usar Xchat y entrar en el canal #musix del > | IRC de > | Freenode, as? vemos esto en tiempo real. > | > | Saludos > | > | | 2007/10/1, Marcos Guglielmetti <marcospcmusica@xxxxxxxxx>: > | | > Hola klondike: > | | > | If all what you want is to play various programs with the same > | | > | soundcard at the same time, dmix should do well. On the alsa wiki > | | > | there are some howtos. > | | > > | | > Thanks, but, we want to control the soundcard, for instance, lower > | | > the mic input, etc. > | | > > | | > There is no software mixer for this soundcard? > | | > > | | > cat /proc/asound/cards > | | > 0 [Pro ]: USB-Audio - FastTrack Pro > | | > M-Audio FastTrack Pro at usb-0000:00:13.0-2, full > | | > > | | > > | | > There are no controls at all opening gnome-alsamixer, kmix, gamix... > | | > > | | > regards, > | | > I have one of those. There is no software ALSA mixer interface on these units. Apparently there is a patch available to allow setting the sample rate and bitdepth: http://alsa.opensrc.org/index.php/M-Audio_FastTrack_Pro - -ken -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFHAnFZe8HF+6xeOIcRAvR0AJ9hgFKLdcGZcIPWfIB9QswOBM+l6gCfR8lc vjdxo38Gbs1GdysBsisBcEU= =dBE8 -----END PGP SIGNATURE----- _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
