Hi all, I haven't posted here for some time now. I've been busy at work, but finally, I have a linux box together that works again... It's a long story. Still, I have a problem. When I started jack on the first lone soundcard, it worked fine. However, I've added a second card, and now I'm having problems starting jack on either of them. The machine is an Athlon64 3200 on an nForce4 board. I'm running an up-to-date Planet CCRMA on Fedora Core 6. The first soundcard (that did work in this machine) is an RME DIGI9636, and the second is an RME 96/8 PAD. Both cards are second-hand, but I have seen each of them working before - the DIGI9636 was used previously with FC3 a year ago, and the 96/8 PAD was working in a Windows machine earlier today. I'm using qjackctl. Here is an excerpt of the messages as I attempt to start jack on the DIGI9636: ***** 04:01:22.393 JACK is starting... 04:01:22.393 jackd -R -dalsa -r48000 -p1024 -n2 -D -Chw:0,0 -Phw:0,0 -i2 -o2 04:01:22.395 JACK was started with PID=3488 (0xda0). jackd 0.103.0 Copyright 2001-2005 Paul Davis and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK compiled with System V SHM support. loading driver .. Enhanced3DNow! detected SSE2 detected apparent rate = 48000 creating alsa driver ... hw:0,0|hw:0,0|1024|2|48000|2|2|nomon|swmeter|-|32bit control device hw:0 configuring for 48000Hz, period = 1024 frames, buffer = 2 periods ALSA: final selected sample format for capture: 32bit little-endian ALSA: cannot set channel count to 2 for capture ALSA: cannot configure capture channel cannot load driver module alsa no message buffer overruns 04:01:22.640 JACK was stopped successfully. 04:01:22.640 Post-shutdown script... 04:01:22.640 killall jackd jackd: no process killed 04:01:22.874 Post-shutdown script terminated with exit status=256. 04:01:24.408 Could not connect to JACK server as client. Please check the messages window for more info. JACK tmpdir identified as [/dev/shm] 04:04:06.538 Startup script... 04:04:06.539 artsshell -q terminate JACK tmpdir identified as [/dev/shm] 04:04:06.782 Startup script terminated with exit status=256. ***** And here is the output for the 96/8 PAD. This one gives a lot of xruns. If attempting to start 'real-time', it just stops again straight away, as follows: ***** 04:04:06.783 JACK is starting... 04:04:06.783 jackd -R -dalsa -r48000 -p1024 -n2 -D -Chw:1 -Phw:1 -i2 -o2 04:04:06.797 JACK was started with PID=3610 (0xe1a). jackd 0.103.0 Copyright 2001-2005 Paul Davis and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK compiled with System V SHM support. loading driver .. Enhanced3DNow! detected SSE2 detected apparent rate = 48000 creating alsa driver ... hw:1|hw:1|1024|2|48000|2|2|nomon|swmeter|-|32bit control device hw:1 configuring for 48000Hz, period = 1024 frames, buffer = 2 periods ALSA: final selected sample format for capture: 32bit little-endian ALSA: use 8 periods for capture ALSA: final selected sample format for playback: 32bit little-endian ALSA: use 8 periods for playback 04:04:08.893 Server configuration saved to "/home/nels/.jackdrc". 04:04:08.895 Statistics reset. 04:04:09.507 Client activated. 04:04:09.509 Audio connection change. 04:04:09.521 Audio connection graph change. 04:04:09.531 XRUN callback (1). JACK tmpdir identified as [/dev/shm] Enhanced3DNow! detected SSE2 detected 04:04:11.518 XRUN callback (45 skipped). jackd watchdog: timeout - killing jackd zombified - calling shutdown handler 04:04:11.926 Shutdown notification. 04:04:11.926 Client deactivated. 04:04:11.927 JACK was stopped successfully. 04:04:11.927 Post-shutdown script... 04:04:11.927 killall jackd cannot read result for request type 7 from server (Connection reset by peer) cannot send request type 7 to server cannot read result for request type 7 from server (Broken pipe) jackd: no process killed 04:04:12.146 Post-shutdown script terminated with exit status=256. ***** Where should I start? Am I doing something obviously/stupidly wrong? Please let me know what other information might help. Thanks, Michael -- Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kanns mit allen: http://www.gmx.net/de/go/multimessenger _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
