hi georg, On Wed, 2006-11-29 at 14:30 +0100, Georg Holzmann wrote: > Hallo! > > When I don't have plugged in my RME at bootup, I have sometimes the > problem, that hdsploader is not able to upload the firmware onto the device: > > holzi@holzi:~$ hdsploader > hdsploader - firmware loader for RME Hammerfall DSP cards > Looking for HDSP + Multiface or Digiface cards : > Card 0 : RME Hammerfall DSP at 0x34000000, irq 9 > Upload firmware for card hw:0 > Hwdep ioctl error on card hw:0 : Input/output error. > Card 1 : Intel 82801DB-ICH4 Modem at 0x2400, irq 9 > > I searched a little bit and found this tip from Esben: > http://lalists.stanford.edu/lau/2006/05/0436.html - which also works for > me ... > > So my question, is there also a way to get hdsploader working without > plugging out/in the card ? (and without a reboot) my procedure is usually unloading the snd-hdsp module and modprobing it again. sometimes i have to unplug the firewire cable while unloading the module ... i didn't ran hdsploader for quite some time, though cheers ... tim -- tim@xxxxxxxxxx ICQ: 96771783 http://www.mokabar.tk There's no such entity as "most people". These are generalities. All generalities are meaningless. You've got to pin it down to a specific person doing a specific thing at a specific time and space. William S. Burroughs
Attachment:
signature.asc
Description: This is a digitally signed message part
