Hallo!
When I don't have plugged in my RME at bootup, I have sometimes the
problem, that hdsploader is not able to upload the firmware onto the device:
holzi@holzi:~$ hdsploader
hdsploader - firmware loader for RME Hammerfall DSP cards
Looking for HDSP + Multiface or Digiface cards :
Card 0 : RME Hammerfall DSP at 0x34000000, irq 9
Upload firmware for card hw:0
Hwdep ioctl error on card hw:0 : Input/output error.
Card 1 : Intel 82801DB-ICH4 Modem at 0x2400, irq 9
I searched a little bit and found this tip from Esben:
http://lalists.stanford.edu/lau/2006/05/0436.html - which also works for
me ...
So my question, is there also a way to get hdsploader working without
plugging out/in the card ? (and without a reboot)
Thanks,
LG
Georg
