Chip VanDan wrote: > > Using a gameport-MIDI interface with a gameport on the motherboard > > should work automatically if the MIDI port is enabled in the BIOS setup > > and if ACPI is enabled. Without ACPI, you have to specify port address > > and interrupt manually, as in: > > > > modprobe snd-mpu401 port=0x330 irq=10 > > > > (however, look up the actual values in the BIOS setup) > > I went to the BIOS and found the actual values, however I don't > understand what I am looking at exactly. There is only one serial > port on my computer, but in the BIOS there were two different > addresses listed, A and B. One was listed at 3F8H/IRQ4 and the other > was at 2F8H/IRQ3. The serial ports have nothing to do with MIDI. The MIDI port should be listed under "gameport" or "MIDI" or "MPU-401". HTH Clemens
