--- Stephen Cameron <smcameron@xxxxxxxxx> wrote: > > Mark Krecht wrote: > > [snip] > > BTW - You can always take the ADAT cable and connected it from the > > output back to an input, send audio out and then see if you can record > > audio coming back in. It's a simple test to make sure the > > Alsa/Hammerfall set up is actually working. If that fails the problem > > is in your Linux setup, or the ADAT cables. If it works then it's > > either in the mixer or an interface problem where the mixer and the > > Hammerfall are not somehow compatible. (Or how you've configured your > > mixer I suppose.... > > Oh, now that's a good idea. I can probably do the same > on the AW as well. Thanks. > > I found jackbitscope here, btw: > http://www.ecs.soton.ac.uk/~njl98r/code/ladspa/bitscope/ > Thanks for that... > > I'll post what I find out tonight. Well, something came up and I wasn't able to try out as much as I wanted to last night, but I did try the loopback test with the AW4416 talking to itself over 50 foot ADAT cable, and that worked. At least I know it's possible to use the cables under some circumstance. -- steve __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com