On Thu, 13 Oct 2005 19:58:01 +0200 Lazzaro Nicol? Ciccolella <ciccolix@xxxxxxxxxxxxx> wrote: > I am not able to configure the bca2000 under linux. > > Although I loaded the module "snd-usb-audio" the only card that comes > seen is the intel motherboard integrated card. The BCA isn't listed with lsusb, so it hasn't been seen by the system. Have you power-cycled it after Linux has booted? I find I have to do that pretty frequently, usually just after I start jack. I don't know what application you want to use the BCA with, but the Wiki entry at http://ardour.org/manual/using_a_bcf2000 has some helpful hints on connecting a BCF/BCA even if you're not using Ardour. -- ====================================================================== Joe Hartley - UNIX/network Consultant - jh@xxxxxxxxxxxx Without deviation from the norm, "progress" is not possible. - FZappa
