On Monday 21 Mar 2005 22:54, Dubphil wrote: > On Mon, Mar 21, 2005 at 08:35:19PM +0100, Robert Jonsson wrote: > > Was it the Input or the Track meter that you checked? > > I checked both the input and the track meter. Ok, that is wierd. I tested now with jack_metro as signal source and it seems to match perfectly at 0db. > > > The track meter by > > default shows the output of the track. To see the real level going into > > the track either check the input meter or click the [pre] button. > > So if the fact of pressing the [Pre] button and check the level of the > track is equivalent to check the level of the input. > > Perhaps there is a difference on the level graduation I mean the yellow > and red zones between MuSE and Rezound... I think the limits are normally -1.0 - +1.0, this is where RED starts. > > Is there any standard about those green yellow and red zones on a vu > meter ? Or each developpers choose the way he will manage this ? Somebody mentioned a standard long ago, don't know what it was, probably every implementation is different ;). I'd think that red means overload for most though. Regards, Robert > > Regards > > Philippe -- http://spamatica.se/musicsite/
