Hello list! I'm having problems with my terratec phase 26 usb audiocard on ppc gentoo linux 2.6.10-r6 ...(on ibook 800Mhz) the card is recognized but jack won't start (or starts 2 secs and then stops) and even aplay gives errors. with plughw:1 jack starts but not for long. This is what jack says: configuring for 48000Hz, period = 1024 frames, buffer = 2 periods Couldn't open hw:1 for 32bit samples trying 24bit instead Couldn't open hw:1 for 24bit samples trying 16bit instead Sorry. The audio interface "hw:1" doesn't support any of the hardware sample formats that JACK's alsa-driver can use. ALSA: cannot configure capture channel cannot load driver module alsa 10:52:26.857 JACK was stopped successfully. 10:52:28.738 Could not connect to JACK server as client. I found this on the list: >> The device uses little endian samples, because this is what the USB >> Audio Spec says. Jack supports only sample formats with native >> endianness. Complain to the Jack developers, and/or use plughw. >well, you can also try the portaudio layer ... my quattro won't work >with jack / alsa ... but portaudio doesn't work with pure data (and thats what i want to use the card with), as far as i know. Does anyone have the same problem with usb audio devices on ppc 2.6.x kernels or knows of a solution ;) ??? (if not, i'm returning my card asap and any suggestions of audiocards compatible with ppc linux + osx would be very welcome ;) Thanks and grtz Marloes
