Julien Claassen wrote: >Hi! > I have a delta 1010lt, and had a lot of problems first. We couldn't really >solve them. We suspected that a slot was damaged and we just plugged it into >another slot, and from that day on my card runs perfectly. I think it is even >syharing its irq with my ethernet card. So if not tried already, do try to >change the slot. And another thing is: Don't use any alsa driver before 0.9.6 >for your card. There was a bug - or more than one -, but this was mainly >solved in 0.9.6. But for good dshare, dmix and so on, better take 1.0.x >drivers. > Btw.: If you're looking for a nice .asoundrc for your card, when it's up and >running, drop a note. > > Yes please. That will come in very handy. > I hope that hleps in any way! > Kindest regards > Julien > >-------- >Music was my first love and it will be my last (John Miles) > >======== FIND MY WEB-PROJECT AT: ======== >http://ltsb.sourceforge.net - the Linux TextBased Studio guide > > > > I still have some niggling questions... 1. When I start the machine and try and run jackstart, it complains that the device in busy. I end up doing a # /etc/init.d/alsasound restart in order to fix it. 2. I'm sure I used to be able to have jack running and be able to use other sound apps at the same time. i.e I could have jack running for ardour and then be able to use xmms at the same time. Instead I get this glenn@upstairs glenn $ xmms ** WARNING **: alsa_setup_mixer(): Failed to find mixer element: PCM ALSA lib pcm_hw.c:1155:(snd_pcm_hw_open) open /dev/snd/pcmC0D0p failed: Device or resource busy ** WARNING **: alsa_setup(): Failed to open pcm device (default): Device or resource busy 3. Trying to run fluidsynth will only work if I use it with alsa rather than through jack. It gives this error when I have xmms going glenn@upstairs glenn $ fluidsynth -a alsa -m alsa_seq /usr/share/sfbank/4gmgsmt.sf2 fluidsynth: warning: Failed to pin the sample data to RAM; swapping is possible. ALSA lib pcm_hw.c:1155:(snd_pcm_hw_open) open /dev/snd/pcmC0D0p failed: Device or resource busy fluidsynth: error: The "default" audio device is used by another application Failed to create the audio driver As a side note. fluidsyth seems to totally butcher the midi. Even with the same soundfont, fluidsyth never sounds like it does with a soundblaster Live! using sfxload. My 1010LT works, it's just a nuisance to have to tweak around all the discrepencies that are cropping up. I'm sure I must have had two sound apps running at the same time once before. Thanks, Glenn
