I only have the usb-midi module, not the snd-usb-midi...I'll try to download and compile it. I'm not using hotplug, by now I always loaded everything manually by adding it in my /etc/rc.d/rc.modules file over Slackware and everything (except the ux256) has worked smoothly. I'll try it. Thanks and...ciao! On Wed, 2004-05-26 at 12:15, Emiliano Grilli wrote: > mercoled?, 26 maggio 2004 alle 11:53:46, ?t3 ha scritto: > > Hi everybody! I'm using Slackware 9.1 with Kernel 2.4.26 patched for > > low-latency. > > Everything is ok, only my usb-midi multiport Yamaha UX256 isn't working. > > I've loaded the usb modules (I use also an usb joypad and a pendrive and > > they work), I've loaded the usb-midi module and at boot time it > > recognizes the UX256 and displays the following kernel messages: > > usb-midi is the OSS module, you have to load the snd-usb-audio module, > which is part of ALSA. > > > But if I run Jack i can't see it...my UX256 isn't avaible in any apps. > > Jack is an audio server, AFAIK for now it knows nothing about MIDI (even if > qjackctl has a facility MIDI-tab under "setup"). I know that MIDI trough > jack is planned, but I guess it will use ALSA as driver. > > > I know it should work beacause I tried with Demudi (www.agnula.org) > > and it works. > > I've also recompiled alsa (1.0.4) but nothing to do... > > Try the snd-usb-audio module, and put these lines into > /etc/hotplug/blacklist: > > usb-midi > snd-usb-audio > > > Any suggestions? I've tried everything I was able to, i've been Googlin' > > but no usefull info. If someone has...THANKS! > > HTH ciao -- =====>?t3<=====
