Ico, I know exactly how frustrated you are, because there are several mailing lists who archives are filled with the history of my own HDSP-sorrows. I did get it working eventually, so maybe I can help out. ico@xxxxxxxx wrote: > ACPI and APIC are disabled due to BIOS issues with the laptop and because even with the pci=noacpi flag in lilo the system still freezes when inserting cardbus. I saw somewhere a kernel patch that would enable use of cardbus with a limited acpi presence (pci=noacpi) but have not tried using it just yet mainly since presence of acpi should not have any positive bearing on resolving this issue (if anything, it would make it even worse due to IRQ shuffling). Is it necessary to be able to hotplug the PCMCIA card while the machine is running? I never do this, because I always get crashes. I also remember getting rather different results when using the acpi=no flag over the pci=noacpi flag. Recommended practice is to use pci=noacpi and leave the card in the slot all the time. As I mentioned, my solution was to move to Gentoo. But you are correct when you point out that Tim's problem was present under Gentoo. My symptoms were a bit different of course, although one part of the saga did involve playing but distorted sound, it was a phase near the end... and the move to Gentoo helped to resolve it. I think at root, the base problem is in fact with either the cardbus controller or some configuration of it. If you'd like to see any particular config files, pls let me know [over the weekend, at least, after that I'm away for more than a week]. good luck, d. -- derek holzer ::: http://www.umatic.nl ---Oblique Strategy # 66: "Emphasize repetitions"
