[linux-audio-user] rme hamerfall setup - pd hangs then quits was UPDATE insmod errors - rme hammerfall multiface UPDATE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> hi and thanks for the help so far!,

Sure....

> the hdsp module is loaded /sbin/lsmod:
> snd-hdsp               46732   0 (autoclean)
> 
> cat /proc/asound/cards
> 0 [default        ]: H-DSP - Hammerfall DSP
>                      RME Hammerfall DSP + Multiface at 0xfeae0000, irq 5
> 
> the motherboards intel sound chip has now disappeared but thats ok...

It is possible to change /etc/modules.conf so that both drivers are
loaded...

> i ran alsaconf again and now and everything seems a lot healthier
> the hdsploader works (the red Host light is now off) as does hdspconf and hdspmixer
> 
> so everything looks fine but when i start pd it hangs for about 20 seconds and 
> then outputs the following errors, then quits.

Try "pd -jack" to start it with audio directed to the Jack server. It is
using the default which is ALSA, and ALSA is not available because it is
being used by Jack :-)

-- Fernando



[Index of Archives]     [Linux Sound]     [ALSA Users]     [Pulse Audio]     [ALSA Devel]     [Sox Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux