Re: Assigning devices at boot up.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

if the USB device id is different for the two usb devices then you might
just write a custum udev-rule that loads the snd-usb-audio module with
different card index parameters..

Regards,
FPS

On 12/8/2020 4:16 PM, Bill Purvis wrote:
I'm trying to put together a church organ, using two midi keyboards.
Unfortunately, they both
power on as channel 0. I can easily interpose a bit of jack code that
changes the channel
but I currently have no way of knowing which is which. They don't appear
to send any useful
information like serial number, and all I can rely on is that they will
always be plugged
in to the same slot each time (as it's all going to be cased up). I can
put them on different
USB Hubs if that is helpful. Any suggestions welcomed.

Bill


--
https://fps.io
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
https://lists.linuxaudio.org/listinfo/linux-audio-user




[Index of Archives]     [Linux Sound]     [ALSA Users]     [Pulse Audio]     [ALSA Devel]     [Sox Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux