> On Tue, 2004-12-14 at 11:33, ish@xxxxxxxxx wrote: > > Hi every one ... i ve witten a kind of a rough How-to(Draft) for initial > > recording using Ardour... and using JAmin along with it via JACK(jackd). > > This was primarily go give a basic how to of intial acoustic recording. > > And how a mastering software, which in this case is JAmin can be used to > > tweak the recording to produce a well spaced/MAstered > > recording...(Basically to achive the stuff in youe head) . Well this is > > just a start... and any input from your side will be helpful... so please > > check out the following site ... > > > > http://users.sarai.net/~ish/contents.html Nice, helpful writeup. I did notice a significant error you might want to correct, however. On this page... http://users.sarai.net/~ish/Exporting_audio.html Your example checks *both* Left and Right stereo channels when exporting Audio 3:out-1 and Audio 3:out-2 to a WAV file. I believe this gives "mono" output in a stereo file (in the sense that both channels will be the same). I recommend checking Left for Audio 3:out-1 and Right for Audio 3:out-2. That will render the stereo outputs from JAMin correctly. -- joq
