On 27/05/2019 13.28, Max wrote: > I know that having different soundcards for in and out will lead to > clock deviations and is generally not a wise thing to do, but my > question is differently: > Surprisingly it works quite well with ALSA, but not so much with jack. ALSA is the low-level interface to the hardware (which Jack also uses). Each sound card is a separate device, each sending/receiving own stream of data. ALSA doesn't care about syncing them together. As generally, when running at the same bitrate, all devices are supposed to be clocked with the same frequency it seems to 'work quite well', e.g. when you sent the same bit stream to two different devices. It may be hours or days, but eventually problems will be apparent – audio output or buffer position getting out of sync, as different devices would digest data in a bit different tempo. Jack is not just another API to send bytes to audio output or receive bytes from input. It merges all audio i/o and processing (done by Jack clients) in a single flow and that flow is driven by a single clock. If that would be a clock of one audio device, and other audio device would be a bit slower/or faster buffer over/underruns would eventually happen. The easiest for implementation is to assume everything uses the same clock, which is usually the case in a studio setup. Otherwise the signal would have to be resampled, which is out of scope of the Jack server (Jack does not process the audio, it just routes in around and adds together). > Both is from Pd. Jack has a plethora of settings, so this could have to > do with it and make my blanket statement above too simplistic, but I > wonder is there a general design in jack which makes it harder to rund > different cards for i/o or do i have the wrong settings? > Where to look at? Let the Jack server do its job the way it does, just attach you extra input/outputs via external Jack clients, like these: https://kokkinizita.linuxaudio.org/linuxaudio/zita-ajbridge-doc/quickguide.html And I think Jack 1 has similar function included, in such case using some Jack setting would work too. Jacek _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx https://lists.linuxaudio.org/listinfo/linux-audio-user
