On 19.07.2018 15:10, Jacek Konieczny wrote:
On 2018-07-19 14:49, Will Godfrey wrote:
On Thu, 19 Jul 2018 14:32:49 +0200
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
I assume that the bus can only be changed by physically attaching the
devices to different ports. Is that right? The audio interface (Texas
Instruments, A Behringer mixer) already is plugged in its own USB port,
I might see if a different port changes something.
You want it on a different *bus*. It's on bus 003 and shared with quite a lot
of other stuff, including two additional hubs. The available bandwidth is shared
between all of these ports.
Try and get it on bus 004 if you can. That one is clean with just a linux root
hub.
As this is 'Linux Foundation 3.0 root hub' then it will be a blue USB
3.0 socket or a USB-C socket. Even if the device is USB 2.0 or USB 1.1
it might work faster as the only device on the bus.
Thanks Jacek, After looking into this I ordered the docking station for
mz laptop as this USB 3.0 Port is onlz available through the dock. Good
find!
m.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
https://lists.linuxaudio.org/listinfo/linux-audio-user
