Hi all, I have (thanks to Mark K. and Lee R.'s help) gotten my usb audio device to function with very low latency. Story at -> http://ruinaudio.com/files/low_lat_usb_audio.html So when I run good old alsamixer -c 1 or gnome-alsamixer... I only get one PCM fader and one MIC fader. Now this card has 2 ins and 6 outs. Also if I raise the PCM fader to 100% I get no sound... bring it back down to 50% and I get full volume. But here's the real question: Is there a mixer that I can use to control all ins and outs of this card? Any suggestions appreciated. For reference I'll include some information: # cat /proc/asound/cards 0 [I82801DBICH4 ]: ICH - Intel 82801DB-ICH4 Intel 82801DB-ICH4 at 0xf4fff800, irq 7 1 [E26 ]: USB-Audio - Emagic EMI 2|6 EMAGIC GmbH Emagic EMI 2|6 at usb-0000:00:1d.0-1, full speed # cat /proc/asound/card1/stream0 EMAGIC GmbH Emagic EMI 2|6 at usb-0000:00:1d.0-1, full speed : USB Audio Playback: Status: Stop Interface 1 Altset 1 Format: S16_LE Channels: 2 Endpoint: 10 OUT (ASYNC) Rates: 44100, 48000, 96000 Interface 1 Altset 2 Format: S16_LE Channels: 6 Endpoint: 10 OUT (ASYNC) Rates: 44100, 48000 Interface 1 Altset 3 Format: S24_3LE Channels: 6 Endpoint: 10 OUT (ASYNC) Rates: 44100, 48000 Interface 1 Altset 4 Format: S24_3LE Channels: 2 Endpoint: 10 OUT (ASYNC) Rates: 96000 Capture: Status: Stop Interface 2 Altset 1 Format: S16_LE Channels: 2 Endpoint: 12 IN (ASYNC) Rates: 44100, 48000, 96000 Interface 2 Altset 2 Format: S24_3LE Channels: 2 Endpoint: 12 IN (ASYNC) Rates: 44100, 48000, 96000 # cat /proc/asound/card1/pcm0c/sub0/hw_params access: MMAP_INTERLEAVED format: S24_3LE subformat: STD channels: 2 rate: 48000 (48000/1) period_size: 1024 buffer_size: 2048 tick_time: 1000 # cat /proc/asound/card1/pcm0p/sub0/hw_params access: MMAP_INTERLEAVED format: S24_3LE subformat: STD channels: 6 rate: 48000 (48000/1) period_size: 1024 buffer_size: 2048 tick_time: 1000
