>>>qjackctl connections window shows alsa_pcm->capture_1 >>>and capture_2, which are connected to things in Ardour, >>>but not qaRecord. >> >> >> Well... you're not going to capture anything with qaRecord unless you >> patch the alsa capture intputs to it. >> >> In Ardour, do you have the tracks to capture you input armed? Hitting >> the record button doesn't do anything if none of the tracks are armed. >> > >Thanks for the reply. > >If I connect alsa_pcm:capture_1 or _2 to qaRecord:in_0 or in_1, then >something shows up in the level monitor in qaRecord, but hovers down at >-80dB and doesn't change regardless of the input. > >In Ardour: I start a new project, add an new track "Audio 1", click the >button "INPUT" which gives me "in 1" or "in 2", so I choose "in 1". >Then, press track's RECORD button and it turns pink. Then press record >button, press play and send sound into mic and line-in. This does not >seem to produce anything. The -80dB is probably the noise floor. Either that or you have things turned down so low it is barely getting a faint signal. Run alsamixer and make sure the channels you are recording from are turned up and/or unmuted. Beyond that I can't help you much. SB cards are an absolute nightmare. Perhaps somebody else on this list who has a SB card can offer more help. The Alsa Wiki can sometimes help. -Reuben -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/ms-tnef Size: 3079 bytes Desc: not available Url : http://music.columbia.edu/pipermail/linux-audio-user/attachments/20041203/44bfb956/attachment.bin
