I would state with almost absolute certainty that your .asoundrc file has no part to play here. The thing that made it work is telling darkice to use plughw:.... rather than hw:... which allows ALSA to fake the hardware setup that darkice says it wants. When you use hw:... you can only use hardware parameters that are directly supported by the hardware itself, which sometimes are not the ones you want/need to use.
On Fri, Apr 1, 2016 at 6:24 AM, Ben Edwards <ben@xxxxxxxxxxxxx> wrote:
OK, got it working, used .~/asoundrc
pcm_slave.sl3 {And the darkice.cfg input section is
pcm "plughw:1,0"
channels 2
rate 44100
}
pcm.complex_convert {
type plug
format S16_LE
slave sl3
}
[input]Ben
device = plughw:1,0 # Alsa soundcard device for the audio input (barenger)
sampleRate = 44100 # sample rate in Hz. try 11025, 22050 or 44100
bitsPerSample = 16
channel = 2 # channels. 1 = mono, 2 = stereo
On 01/04/2016 11:03, Niels Dettenbach wrote:
Am Freitag, 1. April 2016, 10:53:03 schrieb Ben Edwards:OK, just tried that...i've figured out that we have a few 24bit consumer interfaces (USB) too running with darkice. so it *should* work... could you try pls: device = plughw:0 or device = plughw:1 instead? I had to use this instead of the device = hw:0,0 If that did not help, i would try to disable realtime for first until it is working (just as a shot)... hth
--
Ben Edwards, Video Editor/Colorist & Cameraman
w:www.funkytwig.com t. 01179 118 144 m.:07773 02 44 82
skype:funkytwig twitter:@funkytwig
PGP Public key available from pgp.mit.edu
If you are a freelancer FreeAgent is a great system to do your accounts,
if you use http://www.freeagent.com/?referrer=42j4d743
(referral code is 42j4d743) you get 10% off each month.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user
_______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
