On 03/18/2015 07:54 AM, david wrote:
When QJackCtl starts up now, it always displays the message window with this showing in it: 21:30:58.980 Patchbay deactivated. 21:30:58.999 Statistics reset. 21:30:59.007 Could not open ALSA sequencer as a client. ALSA MIDI patchbay will be not available. ALSA lib seq_hw.c:457:(snd_seq_hw_open) open /dev/snd/seq failed: No such file or directory Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started Happens whether I've got it set to use RAW or SEQ midi. I don't have QJackCtl set to start JACK on startup, I start it manually. When I start it manually, it starts up and everything audio works fine. But if I set it to use SEQ, there are no entries in MIDI or ALSA tab. If I set it to use RAW, it finds my E-MU XMidiX1 and adds 1 in and 1 out port. That puts only 1 midi_capture_1 port on the MIDI tab, though. It apparently no longer finds it as an outport (I can tell because the OUT port light on my interface doesn't come on.
you don't seem to have ALSA sequencer kernel module loaded (snd_seq_midi)--you need that for the jackd "seq" midi driver to function properly and/or to get rid of that qjackctl startup message as well or you can disable ALSA sequencer support on qjackctl/Setup/Misc and try again.
hth. cheers -- rncbc aka. Rui Nuno Capela _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
