Ben wrote: > Questions: > How do I set up the card so that Jack can read/write all 64 inputs and > outputs, with no attenuation in the card's mixer? > Does anybody have a valid hwdep-interface example for this card? (I am > trying to contact Winfried but I'm not sure I have a valid email > address for him) > > Thanks for any help, > Ben Loftis > I suspect that this card is indeed not supported by hdspmixer at this time and would likely require some work by Thomas Charbonnel. You couldn't be in better hands when he gets going. In the meantime, if this card is accurately supported by the driver you've loaded (it may not be...) then you could try some set of amixer commands to attempt to set levels and routing. If you're early experiences are anything like my HDSP 9652 experiences a year ago then I would suggest trying to record before you try playing back. The reason for this is that input channels either do or don't make it in and you can more quickly tell if the amixer commands are performing as you wish. On the output side you have to not only set levels, but you also have to set routing. That makes getting output from the RME cards more difficult than getting input. Once you can correctly record you may (or may not) have enough info to get the output side going. Good luck! (You're gonna need it!) ;-) With best regards, Mark
