Does anyone know if the ADC 0 and ADC 1 controls on envy24control actually control the preamp gain on the M-Audio Delta 1010LT or would it just be the AD converter levels? My eventual goal is to use my DAW as a PA processor for small road gigs using Freqtweak or something similar for the master EQ and dynamics processing for FOH and monitors. As a proof of concept I connected the XLR outputs of an Allen & Heath console to the XLR inputs of my Delta 1010LT and connected the outputs of the Delta 1010LT to the power amp. I was not able to get good levels without distortion and I suspect it is because I need to decrease the gain on the mic preamps in the 1010LT. I would've connected to the line-level RCA inputs, but I didn't have a cable handy to try that. The problem seemed to persist even if I lowered the faders on the console. So does the preamp gain sound suspicious or am I connecting something with too much of an output level to a mic preamp to begin with or does it seem like something else? I'm pretty sure I'm not driving the amps with too much level frin the DAW. Any help is greatly appreciated. Greg __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com
