[linux-audio-user] Re: Via 8233

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




I also have a Via 8233 audio controller and have no audio output from 
the conector on the back part of the PC.  I only have output from the 
front conector.  I was assuming that MY hardware had some problem.
Is it normal?...

GZS

My hardware is as follows:

00:00.0 Host bridge: VIA Technologies, Inc. P4M266 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:08.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] 
(rev 34)
00:09.0 Multimedia video controller: Brooktree Corporation Bt848 Video 
Capture (rev 12)
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus 
Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 
Audio Controller (rev 50)
00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 
Modem] (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] 
(rev 74)
01:00.0 VGA compatible controller: S3 Inc. [ProSavageDDR K4M266]


Q wrote:
> Hmm, well I am at work atm so  can't check. But I do know all my
> configuration files are pretty much untouched. I haven't changed anything.
> 
> I don't know about rear speakers. I currently have no sound as I only have a
> digital audio cable going to an external dolby decoder - and I'm trying to
> get SPDIF to work.. I do know that if SPDIF does work the rear speakers
> aren't used unless you are watching a Dolby Digital movie - that is what the
> 5:1 thing is all about. There are currenty only a very few music CDs
> recorded in Dolby digital - and even fewer in DTS.
> 
> I hope this helps.
> 
> Q
> 
> Looks like I am in the same boat as you...
> What does the first line of /proc/asound/card0/ac97#0 say?
> 
> Also did you by any chance get the rear speakers working? I need a
> detailed explenation, because it simply doesn't work for me.
> On tir, 2003-11-25 at 14:57, Q wrote:
> 
> 
>>I guess this is a long shot, but do any of you guys know >how to get
> 
> digital
> 
>>out/SPDIF sound working on a Via 8233 sound chip?
>>
>>I have searched high and low for an answer to this and >have had no luck
> 
> at
> 
>>all.
>>
>>Q
> 
> 
> 
> 


-- 
This Message is sent from my Red Hat 9.0 Linux server
      Machine Registration number 205692 at http://counter.li.org/

       .-.                    Gustavo Zamorano S.
     .-. |                    Registered Linux user number 320898
   .-. | |                                      at http://counter.li.org/
   | | | | ___
   |


[Index of Archives]     [Linux Sound]     [ALSA Users]     [Pulse Audio]     [ALSA Devel]     [Sox Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux