Sounds like you want to do multitrack recording. The card you have will do that. If you're interested in a pro type of application you'll probably want to run Ardour. Alternately there is ecasound and Audacity. Check out my page (http://myweb.cableone.net/eviltwin69/ALSA_JACK_ARDOUR.html). Jan On Sun, 2003-06-08 at 10:59, Akos Maroy wrote: > Hi, > > I just installed a Delta 1010LT multi-channel audio card into my PC. I'm > new to multi channel cards, and have some questions. I'm sorry if these > questions are dull or simple. > > I just installed alsa 0.9.4, as described on the page > http://www.alsa-project.org/alsa-doc/doc-php/template.php3?company=Midiman&card=Delta+1010-LT&chip=Envy24&module=ice1712 > > all modules seem to load fine. > > I have the following questions: > > - mixer > > I can also run alsamixer and env24control, but I can't run aumix or > other mixers that would use the OSS mixer interface. maybe the alsa -> > OSS mixer interface is not configured properly, as: > > # cat /proc/asound/card0/oss_mixer > VOLUME "" 0 > BASS "" 0 > TREBLE "" 0 > SYNTH "" 0 > PCM "" 0 > SPEAKER "" 0 > LINE "" 0 > MIC "" 0 > CD "" 0 > IMIX "" 0 > ALTPCM "" 0 > RECLEV "" 0 > IGAIN "" 0 > OGAIN "" 0 > LINE1 "" 0 > LINE2 "" 0 > LINE3 "" 0 > DIGITAL1 "" 0 > DIGITAL2 "" 0 > DIGITAL3 "" 0 > PHONEIN "" 0 > PHONEOUT "" 0 > VIDEO "" 0 > RADIO "" 0 > MONITOR "" 0 > > > - accessing the multiple input channels as separate OSS devices > > actually the main goal of having this card is to be able to record > parallelly from the separate input channels it has. recording would be > done through opening and reading OSS-style /dev/dsp devices. > > is this possible using this card and alsa drivers? if so, how? is this > related to /etc/asound.conf ? > > > all help would be appreciated, > > > Akos >
