Hi, I just installed a Delta 1010LT multi-channel audio card into my PC. I'm new to multi channel cards, and have some questions. I'm sorry if these questions are dull or simple. I just installed alsa 0.9.4, as described on the page http://www.alsa-project.org/alsa-doc/doc-php/template.php3?company=Midiman&card=Delta+1010-LT&chip=Envy24&module=ice1712 all modules seem to load fine. I have the following questions: - mixer I can also run alsamixer and env24control, but I can't run aumix or other mixers that would use the OSS mixer interface. maybe the alsa -> OSS mixer interface is not configured properly, as: # cat /proc/asound/card0/oss_mixer VOLUME "" 0 BASS "" 0 TREBLE "" 0 SYNTH "" 0 PCM "" 0 SPEAKER "" 0 LINE "" 0 MIC "" 0 CD "" 0 IMIX "" 0 ALTPCM "" 0 RECLEV "" 0 IGAIN "" 0 OGAIN "" 0 LINE1 "" 0 LINE2 "" 0 LINE3 "" 0 DIGITAL1 "" 0 DIGITAL2 "" 0 DIGITAL3 "" 0 PHONEIN "" 0 PHONEOUT "" 0 VIDEO "" 0 RADIO "" 0 MONITOR "" 0 - accessing the multiple input channels as separate OSS devices actually the main goal of having this card is to be able to record parallelly from the separate input channels it has. recording would be done through opening and reading OSS-style /dev/dsp devices. is this possible using this card and alsa drivers? if so, how? is this related to /etc/asound.conf ? all help would be appreciated, Akos
