RE: [PATCH] Bluetooth: btqca: sequential validation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




-----Original Message-----
From: Marcel Holtmann <marcel@xxxxxxxxxxxx> 
Sent: Wednesday, December 8, 2021 8:18 PM
To: Sai Teja Aluvala (Temp) (QUIC) <quic_saluvala@xxxxxxxxxxx>
Cc: Johan Hedberg <johan.hedberg@xxxxxxxxx>; Matthias Kaehlcke <mka@xxxxxxxxxxxx>; Linux Kernel Mailing List <linux-kernel@xxxxxxxxxxxxxxx>; linux-bluetooth <linux-bluetooth@xxxxxxxxxxxxxxx>; Hemant Gupta (QUIC) <quic_hemantg@xxxxxxxxxxx>; MSM <linux-arm-msm@xxxxxxxxxxxxxxx>; quic_bgodavar <quic_bgodavar@xxxxxxxxxxx>; Rocky Liao <rjliao@xxxxxxxxxxxxxx>; hbandi@xxxxxxxxxxxxxx; Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxxxx>; Miao-chen Chou <mcchou@xxxxxxxxxxxx>; PANICKER HARISH (Temp) (QUIC) <quic_pharish@xxxxxxxxxxx>
Subject: Re: [PATCH] Bluetooth: btqca: sequential validation

Hi Sai,

> This change will have sequential validation support & patch config 
> command is added
> 
> Signed-off-by: Sai Teja Aluvala <quic_saluvala@xxxxxxxxxxx>
> ---
> drivers/bluetooth/btqca.c | 45 
> +++++++++++++++++++++++++++++++++++++++++++++
> drivers/bluetooth/btqca.h |  3 +++
> 2 files changed, 48 insertions(+)
> 
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c 
> index be04d74..9a2fd17 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -141,6 +141,49 @@ static int qca_read_fw_build_info(struct hci_dev *hdev)
> 	return err;
> }
> 
> +int qca_send_patch_config_cmd(struct hci_dev *hdev, enum 
> +qca_btsoc_type soc_type) {

look, I have limited understanding for people ignoring warnings. The missing static declaration is obvious and when you compile the code it will actually tell you about it.
[Sai] : will update in next patch

> +	struct sk_buff *skb;
> +	int err = 0;
> +	u8 cmd[5] = {EDL_PATCH_CONFIG_CMD, 0x01, 0, 0, 0};

const u8 cmd[] = { EDL.., .., 0 };
[sai]: will update in next patch

> +	u8 rlen = 0x02;
> +	struct edl_event_hdr *edl;
> +	u8 rtype = EDL_PATCH_CONFIG_CMD;
> +
> +	bt_dev_dbg(hdev, "QCA Patch config");
> +
> +	skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, 
> +EDL_PATCH_CONFIG_CMD_LEN,

sizeof(cmd)
[sai]: will update in next patch

> +			cmd, HCI_EV_VENDOR, HCI_INIT_TIMEOUT);

Indentation is wrong.
[sai] : will update in next patch
> +	if (IS_ERR(skb)) {
> +		err = PTR_ERR(skb);
> +		bt_dev_err(hdev, "Sending QCA Patch config failed (%d)", err);
> +		return err;
> +	}
> +	if (skb->len != rlen) {
> +		bt_dev_err(hdev, "QCA Patch config cmd size mismatch len %d", skb->len);
> +		err = -EILSEQ;
> +		goto out;
> +	}

Extra empty line,
[Sai]: will remove extra line in next patch
> +	edl = (struct edl_event_hdr *)(skb->data);
> +	if (!edl) {
> +		bt_dev_err(hdev, "QCA Patch config with no header");
> +		err = -EILSEQ;
> +		goto out;
> +	}

Here as well.
[Sai]: will remove in next patch
> +	if (edl->cresp != EDL_PATCH_CONFIG_RES_EVT || edl->rtype != rtype) {
> +		bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
> +		 edl->rtype);

Wrong indentation.
[Sai] : will update in next patch.
> +		err = -EIO;
> +		goto out;
> +	}
> +out:
> +	kfree(skb);
> +	if (err)
> +		bt_dev_err(hdev, "QCA Patch config cmd failed (%d)", err);
> +
> +	return err;
> +}
> +
> static int qca_send_reset(struct hci_dev *hdev) {
> 	struct sk_buff *skb;
> @@ -551,6 +594,8 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> 	 */
> 	rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | (soc_ver & 0x0000000f);
> 
> +	if (soc_type == QCA_WCN6750)
> +		qca_send_patch_config_cmd(hdev, soc_type);

Extra empty line.
If you are not using the soc_type, then don’t add it as parameter.
[Sai] : will remove in next patch.

> 	/* Download rampatch file */
> 	config.type = TLV_TYPE_PATCH;
> 	if (qca_is_wcn399x(soc_type)) {
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h 
> index 30afa77..8fbb4c7 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -13,6 +13,8 @@
> #define EDL_PATCH_TLV_REQ_CMD		(0x1E)
> #define EDL_GET_BUILD_INFO_CMD		(0x20)
> #define EDL_NVM_ACCESS_SET_REQ_CMD	(0x01)
> +#define EDL_PATCH_CONFIG_CMD_LEN	(0x05)

Not needed.
[Sai] : will remove in next patch.

> +#define EDL_PATCH_CONFIG_CMD		(0x28)
> #define MAX_SIZE_PER_TLV_SEGMENT	(243)
> #define QCA_PRE_SHUTDOWN_CMD		(0xFC08)
> #define QCA_DISABLE_LOGGING		(0xFC17)
> @@ -24,6 +26,7 @@
> #define EDL_CMD_EXE_STATUS_EVT		(0x00)
> #define EDL_SET_BAUDRATE_RSP_EVT	(0x92)
> #define EDL_NVM_ACCESS_CODE_EVT		(0x0B)
> +#define EDL_PATCH_CONFIG_RES_EVT	(0x00)
> #define QCA_DISABLE_LOGGING_SUB_OP	(0x14)
> 
> #define EDL_TAG_ID_HCI			(17)

Regards

Marcel





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux