Hi Sai,
> This change will have sequential validation support
> & patch config command is added
>
> Signed-off-by: Sai Teja Aluvala <quic_saluvala@xxxxxxxxxxx>
> ---
> drivers/bluetooth/btqca.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
> drivers/bluetooth/btqca.h | 3 +++
> 2 files changed, 48 insertions(+)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index be04d74..9a2fd17 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -141,6 +141,49 @@ static int qca_read_fw_build_info(struct hci_dev *hdev)
> return err;
> }
>
> +int qca_send_patch_config_cmd(struct hci_dev *hdev, enum qca_btsoc_type soc_type)
> +{
look, I have limited understanding for people ignoring warnings. The missing static declaration is obvious and when you compile the code it will actually tell you about it.
> + struct sk_buff *skb;
> + int err = 0;
> + u8 cmd[5] = {EDL_PATCH_CONFIG_CMD, 0x01, 0, 0, 0};
const u8 cmd[] = { EDL.., .., 0 };
> + u8 rlen = 0x02;
> + struct edl_event_hdr *edl;
> + u8 rtype = EDL_PATCH_CONFIG_CMD;
> +
> + bt_dev_dbg(hdev, "QCA Patch config");
> +
> + skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CONFIG_CMD_LEN,
sizeof(cmd)
> + cmd, HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
Indentation is wrong.
> + if (IS_ERR(skb)) {
> + err = PTR_ERR(skb);
> + bt_dev_err(hdev, "Sending QCA Patch config failed (%d)", err);
> + return err;
> + }
> + if (skb->len != rlen) {
> + bt_dev_err(hdev, "QCA Patch config cmd size mismatch len %d", skb->len);
> + err = -EILSEQ;
> + goto out;
> + }
Extra empty line,
> + edl = (struct edl_event_hdr *)(skb->data);
> + if (!edl) {
> + bt_dev_err(hdev, "QCA Patch config with no header");
> + err = -EILSEQ;
> + goto out;
> + }
Here as well.
> + if (edl->cresp != EDL_PATCH_CONFIG_RES_EVT || edl->rtype != rtype) {
> + bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
> + edl->rtype);
Wrong indentation.
> + err = -EIO;
> + goto out;
> + }
> +out:
> + kfree(skb);
> + if (err)
> + bt_dev_err(hdev, "QCA Patch config cmd failed (%d)", err);
> +
> + return err;
> +}
> +
> static int qca_send_reset(struct hci_dev *hdev)
> {
> struct sk_buff *skb;
> @@ -551,6 +594,8 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> */
> rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | (soc_ver & 0x0000000f);
>
> + if (soc_type == QCA_WCN6750)
> + qca_send_patch_config_cmd(hdev, soc_type);
Extra empty line.
If you are not using the soc_type, then don’t add it as parameter.
> /* Download rampatch file */
> config.type = TLV_TYPE_PATCH;
> if (qca_is_wcn399x(soc_type)) {
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index 30afa77..8fbb4c7 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -13,6 +13,8 @@
> #define EDL_PATCH_TLV_REQ_CMD (0x1E)
> #define EDL_GET_BUILD_INFO_CMD (0x20)
> #define EDL_NVM_ACCESS_SET_REQ_CMD (0x01)
> +#define EDL_PATCH_CONFIG_CMD_LEN (0x05)
Not needed.
> +#define EDL_PATCH_CONFIG_CMD (0x28)
> #define MAX_SIZE_PER_TLV_SEGMENT (243)
> #define QCA_PRE_SHUTDOWN_CMD (0xFC08)
> #define QCA_DISABLE_LOGGING (0xFC17)
> @@ -24,6 +26,7 @@
> #define EDL_CMD_EXE_STATUS_EVT (0x00)
> #define EDL_SET_BAUDRATE_RSP_EVT (0x92)
> #define EDL_NVM_ACCESS_CODE_EVT (0x0B)
> +#define EDL_PATCH_CONFIG_RES_EVT (0x00)
> #define QCA_DISABLE_LOGGING_SUB_OP (0x14)
>
> #define EDL_TAG_ID_HCI (17)
Regards
Marcel
